AN AUSTRALIAN accused of killing an Irish tourist in Sydney three years ago has been acquitted in court.
Gearóid Walsh (23) died just one month after he arrived in Australia for a new life.
He got into an argument with Tobias Simmons (30) outside a takeaway food shop and was knocked unconscious with a punch.
A week later in October 2009 his family, from Dublin, made the heartbreaking decision to turn off his life support machine.
Simmons pleaded not guilty to the manslaughter of Gearóid Walsh on the grounds of self defence.Buy low price Aion Kinah,
On his acquittal he expressed his deepest sympathy to the Walsh family.TBC help you confidently purchase China ceramic tile from factories in China.
After her son died his heartbroken mother Tressa Walsh said she did not want the man accused of killing her son jailed.
Mrs Walsh described Gearoid's five weeks in Australia as the "happiest of his life".
"I would really like to say that, as a mother, I really feel for this guy who got into a fight with Gearoid. I am heartbroken for him because we don't blame him, we don't want him to serve time in prison.Welcome to polished tiles. I think he was just very,Sharps include syringe needle, very unlucky,The EZ Breathe home Ventilation system is maintenance free," the mother-of-five said.
"We don't want him to torture himself over this, we don't see it as a murder, Gearoid was very tall, he was 6ft 2in; he had a long way to fall."
In September 2009 Gearoid left the family's home in Dublin to travel over to Brisbane after his older brother Ciaran organised a job for him as a roof insulator.
"He came to Australia to spend time in this beautiful country and to be with his older brother Ciaran and his sister Aoife who are lucky to live here," his mother said. "He came over here to work, as there is no work in Ireland at the moment."
Gearoid and his brother Ciaran travelled from Brisbane to Sydney to help celebrate their sister Aoife's 22nd birthday. They had been drinking in a number of hotels in Coogee, an area on Sydney's eastern beaches popular with Irish backpackers, before Gearoid and his brother went into a fast-food outlet around 11pm.
Just Choose PTMS plastic injection mold Is Your Best Choice!
He became involved in a row with another man, after which the brothers left the take-away. However, he returned a short time later and the argument continued. Gearoid was allegedly struck and he fell, hitting his head on the pavement.
Police found him in cardiac arrest when they arrived on the scene and he was placed on life support at the Prince of Wales hospital.
"Even though Gearoid is a big guy, he wasn't a fighter at all," she said.
His mother maintained her composure as she described the "most positive" aspect of this awful incident was Gearoid's organs being donated to save the lives of several Australians.
“Three years ago I lost my husband, and now my family have lost an adored son, brother, and uncle. Gearoid was like a father figure to my eldest granddaughter, she is seven and so distraught," she said in 2009.
"I can't describe how devastated myself and Gearoid's brother, and sisters and nieces are but sadly our lives will never be the same without Gearoid."
2012年2月29日 星期三
Shopping for $1 million of culinary equipment
Imagine there was a new building in which culinary arts classes were to be taught, and it was your job to choose the cooking equipment and gadgets needed to fill the drawers and racks of the teaching kitchens.
That was the job assigned to chef Denise Perry when Lincoln Land Community College in Springfield, Ill., had a new Workforce Careers Center built. Inside is a restaurant, line kitchen, food production lab and pastry kitchen, and they all needed to be stocked.
“It was like registering for my wedding,” said Perry, 32, the school’s lead culinary instructor. She had experience stocking working kitchens when she was employed in the culinary program at Robert Morris College in the Chicago area.
Before Lincoln Land’s winter break in 2010, Perry was approached about selecting the 3,000 items the school’s new culinary center would need. She got her hands on a pile of food-related catalogs –– including US Foods,Design & Build the Highest Quality Precision injection molds. JB Prince, Sur La Table and Chef Rubber –– and started thumbing through the pages.
“In the old building (Menard Hall), we never had enough equipment for the students. Knowing there are 18 students in our classes, I did a visual walk-through of each class and what was needed,” said Perry. “In garde manger (cold dishes), we were always short on fish poachers and enamel tureen molds. And I knew from teaching that we didn’t have enough specialty pastry equipment.”
She made her list on an Excel spreadsheet: meat mallets, springform pans, balloon whisks, cake decorating stands,Museum Quality hand-painted oil painting reproduction on canvas. French bread molds, refrigerator thermometers, plates and cups, tongs, condiment dispensers, Silpat silicone mats, measuring cups, induction saucepans, sheet pans, forks and spoons, cutting boards, dough dividers, sausage stuffers,This page contains information about molds, apple corers, microplane graters, tart molds, pastry bags and tips, tomato corers, serving platters, chef knives,Specializes in rapid Injection mold and molding of parts for prototypes and production. chocolate molds, rolling pins and on and on.
“If we were making the mother sauces, I wanted each student to have a pan they could wash out and use again,” said Perry, a graduate of the Seattle Culinary Academy.
Just Choose PTMS Injection Molding Is Your Best Choice!That was the job assigned to chef Denise Perry when Lincoln Land Community College in Springfield, Ill., had a new Workforce Careers Center built. Inside is a restaurant, line kitchen, food production lab and pastry kitchen, and they all needed to be stocked.
“It was like registering for my wedding,” said Perry, 32, the school’s lead culinary instructor. She had experience stocking working kitchens when she was employed in the culinary program at Robert Morris College in the Chicago area.
Before Lincoln Land’s winter break in 2010, Perry was approached about selecting the 3,000 items the school’s new culinary center would need. She got her hands on a pile of food-related catalogs –– including US Foods,Design & Build the Highest Quality Precision injection molds. JB Prince, Sur La Table and Chef Rubber –– and started thumbing through the pages.
“In the old building (Menard Hall), we never had enough equipment for the students. Knowing there are 18 students in our classes, I did a visual walk-through of each class and what was needed,” said Perry. “In garde manger (cold dishes), we were always short on fish poachers and enamel tureen molds. And I knew from teaching that we didn’t have enough specialty pastry equipment.”
She made her list on an Excel spreadsheet: meat mallets, springform pans, balloon whisks, cake decorating stands,Museum Quality hand-painted oil painting reproduction on canvas. French bread molds, refrigerator thermometers, plates and cups, tongs, condiment dispensers, Silpat silicone mats, measuring cups, induction saucepans, sheet pans, forks and spoons, cutting boards, dough dividers, sausage stuffers,This page contains information about molds, apple corers, microplane graters, tart molds, pastry bags and tips, tomato corers, serving platters, chef knives,Specializes in rapid Injection mold and molding of parts for prototypes and production. chocolate molds, rolling pins and on and on.
“If we were making the mother sauces, I wanted each student to have a pan they could wash out and use again,” said Perry, a graduate of the Seattle Culinary Academy.
There were appliances to be chosen, such as induction ranges and refrigerators and metal countertops. And some envy-inducing items as well: Robot Coupe food processors, PacoJet frozen dessert machines and an anti-griddle that immediately freezes foods to subzero temperatures.
“We went for the industry standards,Buy low price Aion Kinah, with a little bit of fun. We wanted the students to have equipment they would come across in the real world,” she said.
Art show supports water of life
The parking lot was full and the lobby was crowded last Friday evening at Northstar Church, where literally hundreds of people gathered for the fourth annual Art Show and Sale.
“Art speaks in a language all its own,” said a post at the Northstar website promoting the event. “It has the power to provoke, inspire, and give hope.Our guides provide customers with information about porcelain tiles vs. It is a powerful force that rules the Internet, the airwaves, and demands the square footage of thousands of museums and private galleries. Art is important to us as individuals and to our culture, and we believe it should be celebrated.”
Just Choose PTMS Plastic Mould Is Your Best Choice!
Art was celebrated last week in the form of paintings, mixed media, photographs and drawings created by many of the area’s better-known talents — including Jennifer Bonaventura, Heather Clements, Matty Jankowski, Heather Parker and Paulette Perlman — as well as many lesser-known names and student artists. The show included 314 pieces; 47 pieces sold for a total of $2,566.
Of the sales, 90 percent of the money went directly to the artists, while 10 percent was kept to support the church’s mission to Kiu,Museum Quality hand-painted oil painting reproduction on canvas. a village in Kenya.
“We have an ongoing relationship with the village of Kiu,” said Lee Baker,This page contains information about molds, arts pastor at the church. “A couple of years ago, we built the bore pump there, then installed solar panels to power the pump.Design & Build the Highest Quality Precision injection molds. This year, they’re installing tanks on top of a hill — every year, it gets bigger.”
According to information provided by Northstar, the community of Kiu is a market town divided by a major east-west rail line. Buying and selling of produce is the major economy, with basket and rope weaving also contributing. The village has eight churches, one school and a small medical clinic located at the center of the community on the five-acre grounds of the African Inland Church. The clinic serves people from Kiu and neighboring villages.
“The village is big,” Baker said. “We couldn’t walk across it easily, because of terrain and how extensive it was.Specializes in rapid Injection mold and molding of parts for prototypes and production.”
Access to water is a major issue in the community and people often walk hours to fetch their daily water. The water project was started in 2010 and is nearing completion. With access to clean water on the horizon, the leadership council is shifting their focus to the significant educational challenges that exist in the community.
Meanwhile, church members plan to return later this year to lend a hand.
“We will be working in the community of Kiu with projects that can range from the construction of a water project or school, digging ditches, laying water pipe, building stone walls and putting up fences,” the church website says. “Whatever it may be, we will be working directly with the Kenyan people and the relationships with them are more important than the project.”
“Art speaks in a language all its own,” said a post at the Northstar website promoting the event. “It has the power to provoke, inspire, and give hope.Our guides provide customers with information about porcelain tiles vs. It is a powerful force that rules the Internet, the airwaves, and demands the square footage of thousands of museums and private galleries. Art is important to us as individuals and to our culture, and we believe it should be celebrated.”
Just Choose PTMS Plastic Mould Is Your Best Choice!
Art was celebrated last week in the form of paintings, mixed media, photographs and drawings created by many of the area’s better-known talents — including Jennifer Bonaventura, Heather Clements, Matty Jankowski, Heather Parker and Paulette Perlman — as well as many lesser-known names and student artists. The show included 314 pieces; 47 pieces sold for a total of $2,566.
Of the sales, 90 percent of the money went directly to the artists, while 10 percent was kept to support the church’s mission to Kiu,Museum Quality hand-painted oil painting reproduction on canvas. a village in Kenya.
“We have an ongoing relationship with the village of Kiu,” said Lee Baker,This page contains information about molds, arts pastor at the church. “A couple of years ago, we built the bore pump there, then installed solar panels to power the pump.Design & Build the Highest Quality Precision injection molds. This year, they’re installing tanks on top of a hill — every year, it gets bigger.”
According to information provided by Northstar, the community of Kiu is a market town divided by a major east-west rail line. Buying and selling of produce is the major economy, with basket and rope weaving also contributing. The village has eight churches, one school and a small medical clinic located at the center of the community on the five-acre grounds of the African Inland Church. The clinic serves people from Kiu and neighboring villages.
“The village is big,” Baker said. “We couldn’t walk across it easily, because of terrain and how extensive it was.Specializes in rapid Injection mold and molding of parts for prototypes and production.”
Access to water is a major issue in the community and people often walk hours to fetch their daily water. The water project was started in 2010 and is nearing completion. With access to clean water on the horizon, the leadership council is shifting their focus to the significant educational challenges that exist in the community.
Meanwhile, church members plan to return later this year to lend a hand.
“We will be working in the community of Kiu with projects that can range from the construction of a water project or school, digging ditches, laying water pipe, building stone walls and putting up fences,” the church website says. “Whatever it may be, we will be working directly with the Kenyan people and the relationships with them are more important than the project.”
2012年2月27日 星期一
Medical device can propel itself through the bloodstream
At the International Solid-State Circuits Conference before an audience of her peers, electrical engineer Ada Poon demonstrated a tiny, wirelessly powered, self-propelled medical device capable of controlled motion through a fluid—blood more specifically. The era of swallow-the-surgeon medical care may no longer be the stuff of science fiction.
Poon is an assistant professor at the Stanford School of Engineering. She is developing a new class of medical devices that can be implanted or injected into the human body and powered wirelessly using electromagnetic radio waves. No batteries to wear out.Here's a complete list of oil painting supplies for the beginning oil painter. No cables to provide power.
"Such devices could revolutionize medical technology," said Poon. "Applications include everything from diagnostics to minimally invasive surgeries."
Certain of these new devices, like heart probes, chemical and pressure sensors, cochlear implants, pacemakers, and drug pumps, would be stationary within the body. Others, like Poon's most recent creations, could travel through the bloodstream to deliver drugs, perform analyses, and perhaps even zap blood clots or removing plaque from sclerotic arteries.
The idea of implantable medical devices is not new, but most of today's implements are challenged by power, namely the size of their batteries, which are large, heavy and must be replaced periodically. Fully half the volume of most of these devices is consumed by battery.Distributes and manufactures RUBBER SHEET,
"While we have gotten very good at shrinking electronic and mechanical components of implants, energy storage has lagged in the move to miniaturize," said co-author Teresa Meng, a professor of electrical engineering and of computer science at Stanford. "This hinders us in where we can place implants within the body, but also creates the risk of corrosion or broken wires, not to mention replacing aging batteries." Just Choose PTMS plastic injection mould Is Your Best Choice!
Poon's devices are different. They consist of a radio transmitter outside the body sending signals to an independent device inside the body that picks up the signal with an antenna of coiled wire. The transmitter and the antenna are magnetically coupled such that any change in current flow in the transmitter produces a voltage in the coiled wire — or, more accurately, it induces a voltage. The power is transferred wirelessly. The electricity runs electronics on the device and propels it through the bloodstream, if so desired.
It sounds easy,Silicone Mold Making Rubber, but it is not. Poon had to first upend some long-held assumptions about the delivery of wireless power inside the human body. For fifty years, scientists have been working on wireless electromagnetic powering of implantable devices, but they ran up against mathematics. According to the models,All RUBBER MATS is comprised of all types of mats, high-frequency radio waves dissipate quickly in human tissue, fading exponentially the deeper they go. Low-frequency signals, on the other hand, penetrate well, but require antennae a few centimeters in diameter to generate enough power for the device,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. far too large to fit through all but the biggest arteries. In essence, because the math said it could not be done, the engineers never tried.
Poon started to look more closely at the models. She realized that scientists were approaching the problem incorrectly. In their models, they assumed that human muscle, fat and bone were generally good conductors of electricity, and therefore governed by a specific subset of the mathematical principles known as Maxwell's equations — the "quasi-static approximation" to be exact. Poon took a different tack, choosing instead to model tissue as a dielectric — a type of insulator. As it turns out human tissue is a poor conductor of electricity. But, radio waves can still move through them. In a dielectric, the signal is conveyed as waves of shifting polarization of atoms within cells. Even better, Poon also discovered that human tissue is a "low-loss" dielectric — that is to say little of the signal gets lost along the way.
She recalculated and made a surprising find: Using new equations she learned high-frequency radio waves \ travel much farther in human tissue than originally thought. "When we extended things to higher frequencies using a simple model of tissue we realized that the optimal frequency for wireless powering is actually around one gigahertz," said Poon, "about 100 times higher than previously thought."
More significantly, however, her revelation meant that antennae inside the body could be 100 times smaller and yet deliver the same power.
Poon was not so much in search of a new technology; she was in search of a new math. The antenna on the device Poon demonstrated at the conference is just two millimeters square; small enough to travel through the bloodstream.
She has developed two types of self-propelled devices. One drives electrical current directly through the fluid to create a directional force that pushes the device forward. This type of device is capable of moving at just over half-a-centimeter per second. The second type switches current back-and-forth in a wire loop to produce swishing motion similar to the motion a kayaker makes to paddle upstream.
Poon is an assistant professor at the Stanford School of Engineering. She is developing a new class of medical devices that can be implanted or injected into the human body and powered wirelessly using electromagnetic radio waves. No batteries to wear out.Here's a complete list of oil painting supplies for the beginning oil painter. No cables to provide power.
"Such devices could revolutionize medical technology," said Poon. "Applications include everything from diagnostics to minimally invasive surgeries."
Certain of these new devices, like heart probes, chemical and pressure sensors, cochlear implants, pacemakers, and drug pumps, would be stationary within the body. Others, like Poon's most recent creations, could travel through the bloodstream to deliver drugs, perform analyses, and perhaps even zap blood clots or removing plaque from sclerotic arteries.
The idea of implantable medical devices is not new, but most of today's implements are challenged by power, namely the size of their batteries, which are large, heavy and must be replaced periodically. Fully half the volume of most of these devices is consumed by battery.Distributes and manufactures RUBBER SHEET,
"While we have gotten very good at shrinking electronic and mechanical components of implants, energy storage has lagged in the move to miniaturize," said co-author Teresa Meng, a professor of electrical engineering and of computer science at Stanford. "This hinders us in where we can place implants within the body, but also creates the risk of corrosion or broken wires, not to mention replacing aging batteries." Just Choose PTMS plastic injection mould Is Your Best Choice!
Poon's devices are different. They consist of a radio transmitter outside the body sending signals to an independent device inside the body that picks up the signal with an antenna of coiled wire. The transmitter and the antenna are magnetically coupled such that any change in current flow in the transmitter produces a voltage in the coiled wire — or, more accurately, it induces a voltage. The power is transferred wirelessly. The electricity runs electronics on the device and propels it through the bloodstream, if so desired.
It sounds easy,Silicone Mold Making Rubber, but it is not. Poon had to first upend some long-held assumptions about the delivery of wireless power inside the human body. For fifty years, scientists have been working on wireless electromagnetic powering of implantable devices, but they ran up against mathematics. According to the models,All RUBBER MATS is comprised of all types of mats, high-frequency radio waves dissipate quickly in human tissue, fading exponentially the deeper they go. Low-frequency signals, on the other hand, penetrate well, but require antennae a few centimeters in diameter to generate enough power for the device,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. far too large to fit through all but the biggest arteries. In essence, because the math said it could not be done, the engineers never tried.
Poon started to look more closely at the models. She realized that scientists were approaching the problem incorrectly. In their models, they assumed that human muscle, fat and bone were generally good conductors of electricity, and therefore governed by a specific subset of the mathematical principles known as Maxwell's equations — the "quasi-static approximation" to be exact. Poon took a different tack, choosing instead to model tissue as a dielectric — a type of insulator. As it turns out human tissue is a poor conductor of electricity. But, radio waves can still move through them. In a dielectric, the signal is conveyed as waves of shifting polarization of atoms within cells. Even better, Poon also discovered that human tissue is a "low-loss" dielectric — that is to say little of the signal gets lost along the way.
She recalculated and made a surprising find: Using new equations she learned high-frequency radio waves \ travel much farther in human tissue than originally thought. "When we extended things to higher frequencies using a simple model of tissue we realized that the optimal frequency for wireless powering is actually around one gigahertz," said Poon, "about 100 times higher than previously thought."
More significantly, however, her revelation meant that antennae inside the body could be 100 times smaller and yet deliver the same power.
Poon was not so much in search of a new technology; she was in search of a new math. The antenna on the device Poon demonstrated at the conference is just two millimeters square; small enough to travel through the bloodstream.
She has developed two types of self-propelled devices. One drives electrical current directly through the fluid to create a directional force that pushes the device forward. This type of device is capable of moving at just over half-a-centimeter per second. The second type switches current back-and-forth in a wire loop to produce swishing motion similar to the motion a kayaker makes to paddle upstream.
Businesses see a mixed blessing in mild winter
During a normal winter season, contractors are working inside, hardware stores are selling sleds and shovels, and most residents are staying snug indoors. This has not been the case with the winter of 2011.Here's a complete list of oil painting supplies for the beginning oil painter. Contractors and hardware retailers said the warmer weather has had contractors working outside and retailers selling few sleds, shovels or heating units. Bud Funkhouser, owner of Bud's True Value Hardware in Mount Vernon, said business this winter season has been slower than normal.
"It was too warm," Funkhouser said. "There was no snow, so we didn't sell any sleds, ice-melts, heat tapes or things like that."
Business was not as bad as it could have been, with only a two to three percent slip in sales. Funkhouser said the large part of his 40 year old business depends on basic hardware.
"We're a nuts-and-bolts store," Funkhouser said. "That's what keeps us going, winter sales don't make or break us."
The case is the same for other hardware stores. Ryan's ACE Hardware sold few if any winter supplies this season. ACE assistant manager Ron Kriegshauser said the lack of winter sales put a small drain on the store. Just Choose PTMS plastic injection mould Is Your Best Choice!
"It certainly isn't good, but it didn't kill us," Kriegshauser said.
Some winter supplies did sell well in comparison to others. Gloves, ice-scrapers and ice-melts sold well at ACE. Kriegshauser said overall sales were up from last year, an increase he attributed to the weather.
"This warmer weather has people going out more," Kriegshauser said. "So when they do go out, sometimes they stop in here and buy something."
Warmer weather is not the only deterrent for winter supplies sales. Funkhouser said the economy has people cutting back on what they are buying.
"The biggest complaint I hear is the price of gas," Funkhouser said.All RUBBER MATS is comprised of all types of mats, "People would rather have gas in their car than a new hammer or sled or anything like that."
Kriegshauser also cited the economy as affecting sales. He said people are hard up and won't buy on impulse as readily.
"With things the way they are, people won't buy anything they don't think they'll use," Kriegshauser said. "They are waiting until the last minute when they need something to buy it. And for winter supplies, that moment never came.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists."
Funkhouser isn't sure why Bud's True Value did better in the month of January than in December. He guessed it was because contractors were coming in for hardware supplies.
"We supply a lot of independent and commercial contractors," Funkhouser said. "They were getting out and working a bit more because of the weather."
Tim Bartlett, co-owner of B&S Home Improvement LLC,Silicone Mold Making Rubber, confirmed that assessment. He said the weather has allowed his employees to work outside during months they normally would be inside.
"We usually can't do roof work in February because it is too icy and cold," Bartlett said. "But now we've been roofing and painting in February when we would have to normally wait until March or April."
In the months leading up to the winter season, the scare of a heavy winter had residents making emergency improvement requests. Bartlett said their schedule is planned out for the year in advance, but they sometimes make emergency repairs or improvements.
"We had to squeeze some paint jobs in before winter," Bartlett said. "Then the (mild) weather came and we got to paint in February too."
Working throughout the year eases the workload for contracting companies such as B&S. Bartlett said it allows them to spread the work they do on the outside and inside evenly, instead of delaying it.
"We've really been able to get out there and get it done," Bartlett said.Distributes and manufactures RUBBER SHEET, "We wouldn't be able to do half this stuff if the weather was bad."
For hardware stores, the winter season wasn't all bad. Since he didn't sell much of his winter supplies, Funkhouser said his winter inventory is full.
"One good thing is we don't have to restock on any of this next year," Funkhouser said. "This stuff is not like lettuce or milk, it doesn't go bad."
"It was too warm," Funkhouser said. "There was no snow, so we didn't sell any sleds, ice-melts, heat tapes or things like that."
Business was not as bad as it could have been, with only a two to three percent slip in sales. Funkhouser said the large part of his 40 year old business depends on basic hardware.
"We're a nuts-and-bolts store," Funkhouser said. "That's what keeps us going, winter sales don't make or break us."
The case is the same for other hardware stores. Ryan's ACE Hardware sold few if any winter supplies this season. ACE assistant manager Ron Kriegshauser said the lack of winter sales put a small drain on the store. Just Choose PTMS plastic injection mould Is Your Best Choice!
"It certainly isn't good, but it didn't kill us," Kriegshauser said.
Some winter supplies did sell well in comparison to others. Gloves, ice-scrapers and ice-melts sold well at ACE. Kriegshauser said overall sales were up from last year, an increase he attributed to the weather.
"This warmer weather has people going out more," Kriegshauser said. "So when they do go out, sometimes they stop in here and buy something."
Warmer weather is not the only deterrent for winter supplies sales. Funkhouser said the economy has people cutting back on what they are buying.
"The biggest complaint I hear is the price of gas," Funkhouser said.All RUBBER MATS is comprised of all types of mats, "People would rather have gas in their car than a new hammer or sled or anything like that."
Kriegshauser also cited the economy as affecting sales. He said people are hard up and won't buy on impulse as readily.
"With things the way they are, people won't buy anything they don't think they'll use," Kriegshauser said. "They are waiting until the last minute when they need something to buy it. And for winter supplies, that moment never came.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists."
Funkhouser isn't sure why Bud's True Value did better in the month of January than in December. He guessed it was because contractors were coming in for hardware supplies.
"We supply a lot of independent and commercial contractors," Funkhouser said. "They were getting out and working a bit more because of the weather."
Tim Bartlett, co-owner of B&S Home Improvement LLC,Silicone Mold Making Rubber, confirmed that assessment. He said the weather has allowed his employees to work outside during months they normally would be inside.
"We usually can't do roof work in February because it is too icy and cold," Bartlett said. "But now we've been roofing and painting in February when we would have to normally wait until March or April."
In the months leading up to the winter season, the scare of a heavy winter had residents making emergency improvement requests. Bartlett said their schedule is planned out for the year in advance, but they sometimes make emergency repairs or improvements.
"We had to squeeze some paint jobs in before winter," Bartlett said. "Then the (mild) weather came and we got to paint in February too."
Working throughout the year eases the workload for contracting companies such as B&S. Bartlett said it allows them to spread the work they do on the outside and inside evenly, instead of delaying it.
"We've really been able to get out there and get it done," Bartlett said.Distributes and manufactures RUBBER SHEET, "We wouldn't be able to do half this stuff if the weather was bad."
For hardware stores, the winter season wasn't all bad. Since he didn't sell much of his winter supplies, Funkhouser said his winter inventory is full.
"One good thing is we don't have to restock on any of this next year," Funkhouser said. "This stuff is not like lettuce or milk, it doesn't go bad."
PayPal Takes Controversial Stance Against Sex
"Most of the stuff on Smashwords is porn," Jonathan Bloom, whose ebook Hell Is Above Us is available on Smashwords, tweeted recently. "I feel like someone trying to sell a homemade quilt on the street next to a line of high-end hookers.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists."
On Saturday, February 18, PayPal contacted Smashwords with an ultimatum: Remove the "edgy" erotica, or face deactivation of their PayPal account. Since PayPal is integrated into the Smashwords website, Smashwords had no choice but to comply. "I've had multiple conversations with PayPal over the last several days to better understand their requirements," founder Mark Coker wrote in an e-mail to authors whose works were categorized as "erotica" on the site. "Their team has been helpful, forthcoming and supportive of the Smashwords mission.All RUBBER MATS is comprised of all types of mats, I appreciate their willingness to engage in dialogue. Although they have tried their best to delineate their policies, gray areas remain. Their hot buttons are bestiality, rape-for-titillation, incest and underage erotica."
While Smashwords already prohibited self-published authors from submitting stories featuring underage characters in works of erotica,Welcome to the online guide for do-it-yourself Ceramic tile. they had to implement new guidelines for bestiality, rape, and incest in order to comply with PayPal's ultimatum. Smashwords will no longer allow authors to sell erotica featuring "pseudo-incest" or "shape-shifters in paranormal romance" engaging in sex while in "were-creature" form. Smashwords' new guidelines apply only to works labelled as "erotica," so other genres are okay. For now. Just Choose PTMS plastic injection mold Is Your Best Choice!
"We do not want to see PayPal clamp down further against erotica," Coker wrote. "We think our authors should be allowed to publish erotica. Erotica, despite the attacks it faces from moralists, is a category worthy of protection. Erotica allows readers to safely explore aspects of sexuality that they might never want to explore in the real world.Silicone Mold Making Rubber,.. Erotica authors are facing discrimination, plain and simple. Topics that are perfectly acceptable in mainstream fiction are verboten in erotica. That's not fair. If you're going to push the limits, push the limits of great writing, not the limits of legality."
"What I find chilling is that the money exchanger, not the merchant, can make such a decision," commenter L.K. Rigel wrote on a Dear Author blog post, where news of PayPal's actions were reported on Friday.Here's a complete list of oil painting supplies for the beginning oil painter. "PayPal is, after all, basically a bank. So now a bank gets to decide what customers can buy or merchants can sell? The decision is only palatable because they're cutting off stuff people mostly find abhorrent." Moriah Jovan wrote, "Paypal is NOT a bank and they spend a lot of time in Washington lobbying to keep from being defined and thus regulated like a bank. They have far more latitude than banks do."
On Saturday, February 18, PayPal contacted Smashwords with an ultimatum: Remove the "edgy" erotica, or face deactivation of their PayPal account. Since PayPal is integrated into the Smashwords website, Smashwords had no choice but to comply. "I've had multiple conversations with PayPal over the last several days to better understand their requirements," founder Mark Coker wrote in an e-mail to authors whose works were categorized as "erotica" on the site. "Their team has been helpful, forthcoming and supportive of the Smashwords mission.All RUBBER MATS is comprised of all types of mats, I appreciate their willingness to engage in dialogue. Although they have tried their best to delineate their policies, gray areas remain. Their hot buttons are bestiality, rape-for-titillation, incest and underage erotica."
While Smashwords already prohibited self-published authors from submitting stories featuring underage characters in works of erotica,Welcome to the online guide for do-it-yourself Ceramic tile. they had to implement new guidelines for bestiality, rape, and incest in order to comply with PayPal's ultimatum. Smashwords will no longer allow authors to sell erotica featuring "pseudo-incest" or "shape-shifters in paranormal romance" engaging in sex while in "were-creature" form. Smashwords' new guidelines apply only to works labelled as "erotica," so other genres are okay. For now. Just Choose PTMS plastic injection mold Is Your Best Choice!
"We do not want to see PayPal clamp down further against erotica," Coker wrote. "We think our authors should be allowed to publish erotica. Erotica, despite the attacks it faces from moralists, is a category worthy of protection. Erotica allows readers to safely explore aspects of sexuality that they might never want to explore in the real world.Silicone Mold Making Rubber,.. Erotica authors are facing discrimination, plain and simple. Topics that are perfectly acceptable in mainstream fiction are verboten in erotica. That's not fair. If you're going to push the limits, push the limits of great writing, not the limits of legality."
"What I find chilling is that the money exchanger, not the merchant, can make such a decision," commenter L.K. Rigel wrote on a Dear Author blog post, where news of PayPal's actions were reported on Friday.Here's a complete list of oil painting supplies for the beginning oil painter. "PayPal is, after all, basically a bank. So now a bank gets to decide what customers can buy or merchants can sell? The decision is only palatable because they're cutting off stuff people mostly find abhorrent." Moriah Jovan wrote, "Paypal is NOT a bank and they spend a lot of time in Washington lobbying to keep from being defined and thus regulated like a bank. They have far more latitude than banks do."
Should plastics expect the LeBron treatment in Orlando?
So,Welcome to the online guide for do-it-yourself Ceramic tile. the NBA All-Star weekend wrapped up Sunday night. The events and games are entertaining and all, but I found myself watching the events a little more closely than usual. Could it be because my team is no. 1 in the West? Or maybe it's because All-Star weekend was held at the very same city the plastics industry will invade come April. Just Choose PTMS Injection Molding Is Your Best Choice!
Orlando certainly rolled out the red carpet for NBA stars such as LeBron James, Kobe Bryant, and Kevin Durant. There were flashing lights, fog effects, and blaring hip-hop music. I wonder if we should expect the same treatment at NPE2012?
After all, according to SPI,Here's a complete list of oil painting supplies for the beginning oil painter. this might be one of the biggest NPE shows of recent years.
About 1830 companies have purchased 903,000 sq ft (83,890 sq m) of exhibit space at NPE2012, and commitments by more companies can be expected between now and opening day, SPI stated. The exhibit space total thus far is one-fifth greater than the amount actually occupied at NPE2009.
Total registration for NPE2012 will exceed 50,000, 16% more than in 2009, and could approach 60,000. The 35 largest exhibitors at NPE2012 are averaging 20% more equipment than they did at NPE2009, as measured by the weight per square foot of exhibit space.
While All-Star weekend featured lobs and drunks from the likes of Chris Paul and Blake Griffin, NPE attendees will be entertained by aisle after aisle of working plastics equipment filling the exhibit halls with clamor and action. SPI stated the equipment total for NPE2012 will exceed the weight of two hundred Boeing 747 jetliners.
All-Star weekend had hip-hop artist Pitbull perform during half-time show doing his form of rapping, which sounds more like talking,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. to the crowd.
Well, NPE might not have anyone named Pitbull,Silicone Mold Making Rubber, but it will feature Jon Huntsman, Jr., the former Governor and ambassador, delivering the keynote address. Since Huntsman is a politician well versed in plastics (Huntsman Corp. is global plastics and chemicals maker with annual sales of more than $9 billion), you can expect a lively speech about the industry.
Okay, so the similarities are pretty slim when comparing NBA All-Star weekend and NPE, other than the fact both events share the same location - sunny Orlando, FL.
Maybe we won't have a red carpet or fog effects welcoming us to Florida, but rest assured, as we uncovered in our upcoming NPE Show Issue, there is a wide variety of dining, entertainment, and attractions in Orlando to occupy your time.
And if you are really looking for a connection between sports and plastics,All RUBBER MATS is comprised of all types of mats, don't forget the Plastics in Sports exhibits and demonstrations at NPE2012 to showcase the impact of plastics in the sporting world. From the evolution of the golf ball, to the science and technology behind building race cars, to protecting the participants in sporting events, SPI will provide a look back at the technological achievements in sports through plastic materials, molding, equipment, designs and the processes that were used in past decades. It will also feature products, services and technologies that will allow the industry to shape the future of sports.
Orlando certainly rolled out the red carpet for NBA stars such as LeBron James, Kobe Bryant, and Kevin Durant. There were flashing lights, fog effects, and blaring hip-hop music. I wonder if we should expect the same treatment at NPE2012?
After all, according to SPI,Here's a complete list of oil painting supplies for the beginning oil painter. this might be one of the biggest NPE shows of recent years.
About 1830 companies have purchased 903,000 sq ft (83,890 sq m) of exhibit space at NPE2012, and commitments by more companies can be expected between now and opening day, SPI stated. The exhibit space total thus far is one-fifth greater than the amount actually occupied at NPE2009.
Total registration for NPE2012 will exceed 50,000, 16% more than in 2009, and could approach 60,000. The 35 largest exhibitors at NPE2012 are averaging 20% more equipment than they did at NPE2009, as measured by the weight per square foot of exhibit space.
While All-Star weekend featured lobs and drunks from the likes of Chris Paul and Blake Griffin, NPE attendees will be entertained by aisle after aisle of working plastics equipment filling the exhibit halls with clamor and action. SPI stated the equipment total for NPE2012 will exceed the weight of two hundred Boeing 747 jetliners.
All-Star weekend had hip-hop artist Pitbull perform during half-time show doing his form of rapping, which sounds more like talking,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. to the crowd.
Well, NPE might not have anyone named Pitbull,Silicone Mold Making Rubber, but it will feature Jon Huntsman, Jr., the former Governor and ambassador, delivering the keynote address. Since Huntsman is a politician well versed in plastics (Huntsman Corp. is global plastics and chemicals maker with annual sales of more than $9 billion), you can expect a lively speech about the industry.
Okay, so the similarities are pretty slim when comparing NBA All-Star weekend and NPE, other than the fact both events share the same location - sunny Orlando, FL.
Maybe we won't have a red carpet or fog effects welcoming us to Florida, but rest assured, as we uncovered in our upcoming NPE Show Issue, there is a wide variety of dining, entertainment, and attractions in Orlando to occupy your time.
And if you are really looking for a connection between sports and plastics,All RUBBER MATS is comprised of all types of mats, don't forget the Plastics in Sports exhibits and demonstrations at NPE2012 to showcase the impact of plastics in the sporting world. From the evolution of the golf ball, to the science and technology behind building race cars, to protecting the participants in sporting events, SPI will provide a look back at the technological achievements in sports through plastic materials, molding, equipment, designs and the processes that were used in past decades. It will also feature products, services and technologies that will allow the industry to shape the future of sports.
2012年2月26日 星期日
Should we be providing needles for drug users?
Mickey Weiss visits Bethany Place to keep himself and his drug-using friends alive.
Weiss is a 34-year-old drug addict who lives in Collinsville. Once a week, he goes to the Belleville nonprofit agency to pick up new needles, a vial of the overdose reversal drug naloxone and an injection kit.
The kit comes in a black plastic bag that contains the other tools he needs to shoot up speed and heroin: a tourniquet, alcohol wipes, filters and a cooker to liquefy the drug. Taxpayers spent $15,000 on the Belleville program last year.
The needles and kit help prevent Weiss from contracting and spreading blood-transmitted diseases such as HIV and hepatitis C. The naloxone has helped him save lives.
Just Choose PTMS Injection Molding Is Your Best Choice!Weiss is a 34-year-old drug addict who lives in Collinsville. Once a week, he goes to the Belleville nonprofit agency to pick up new needles, a vial of the overdose reversal drug naloxone and an injection kit.
The kit comes in a black plastic bag that contains the other tools he needs to shoot up speed and heroin: a tourniquet, alcohol wipes, filters and a cooker to liquefy the drug. Taxpayers spent $15,000 on the Belleville program last year.
The needles and kit help prevent Weiss from contracting and spreading blood-transmitted diseases such as HIV and hepatitis C. The naloxone has helped him save lives.
In a single week, Weiss injected naloxone into three overdosing people who had injected heroin mixed with fentanyl. One got mad because he killed her high.
"The bottom line -- she wasn't dead, either," Weiss said.
Weiss is one of 317 participants in Southern Illinois' only needle exchange program. Intravenous drug users can pick up the free needle supplies, 24 hours a day, seven days a week at Bethany Place, 821 W. A. St. in Belleville. The program also provides needle disposal bins, condoms and information about drug treatment services.
Since its inception in 2009, the confidential program has dispensed thousands of needles and collected 58,134 used needles, according to Executive Director Angela Barnes.
"Our goal is to stop the spread of HIV," Barnes said.
Bethany Place serves a 12-county area in the metro-east and is one of eight needle exchange programs across the state that rely on taxpayer and private money to distribute 4 million needles a year, according to the Illinois Department of Public Health.
Bethany Place's naloxone is provided through the Chicago Recovery Alliance, which buys it with private money from the North American Syringe Exchange Network. The local program has had 145 participants who have reversed 50 overdoses, Barnes said.
The criticisms that have dogged needle exchange programs since they began decades ago are shared by some community members and law enforcement officers who are concerned about the drug overdose epidemic that has gripped the metro-east.
"Sounds like legalized drug dealing," Madison County Sheriff Robert Hertz said when told of the program. "At what point are they going to hand out the heroin, too?"
Susanne Dashner, of Belleville, said the program encourages addicts such as her 27-year-old son to continue to use.
"The problem is that not only do they give them syringes, they give them the little cooking cup, they give them the filters, and they give them a tourniquet so they got everything they need to use to illegally shoot up heroin," said Dashner. "And if that doesn't top it off, they give them the generic form of Narcan."
Public and private health officials counter that needle exchange programs neither facilitate nor encourage drug use, citing years of research to the contrary. They also explained that disease can spread through the shared use and re-use of tourniquets, filters and cookers.
"We are helping them prevent infection," said Stephenie Koester, Bethany Place's community education and prevention coordinator. "We are not helping them use."
But even someone understanding of the program voiced concerns after a Belleville woman overdosed on heroin Feb. 8 in one of Bethany Place's bathrooms. She was revived by staff but was later charged with possessing heroin.
"I think it's quite clear to many people in the community that Bethany Place does great work in terms of protecting public health and preventing the spread of diseases like HIV and hepatitis," St. Clair County State's Attorney Brendan Kelly said. "But again I have a concern that their needle exchange program be tightly administered in a way that doesn't conflict with the mission of law enforcement."
"It's a tricky balance between public health and public safety."
It wasn't Bethany Place's idea to start handing out needles and injection kits to drug addicts.
In 2009, the AIDS Foundation of Chicago asked Bethany Place to become the first needle exchange program south of Springfield because of St. Clair County's high rate of HIV, said Jessica Terlikowski, the AIDS Foundation's director of regional organizing. The foundation was paying for needle exchange programs through a state grant.
St. Clair County had the fifth-highest rate of new diagnoses of HIV and AIDS cases the past six years among Illinois counties, according to an October 2011 report by the Illinois Public Health Department.
"There wasn't a program down there," Terlikowski said. "And there was a need down there."
Needle exchange programs in Illinois have ties to Chicago organizations that started programs in the 1990s in reaction to the AIDS epidemic.
The Chicago Recovery Alliance established the state's first needle exchange program in 1992 solely using private donations. Within the next decade, it developed a naloxone program.
Illinois needle exchange programs are covered by an exemption in the Illinois Hypodermic Syringes and Needles Act that allows participants in scientific research programs to carry an unspecified number of needles. An amendment added in 2003 allows anyone 18 or older to buy needles from a pharmacy without a prescription and possess up to 20 needles.
The law does not protect anybody who has illegal drugs in either their needles or injection equipment, Kelly said.We are professional Plastic mould,
Bethany Place participants carry around a card citing the exemption that allows them to carry needles. Barnes said she has had to ask Kelly to dismiss charges in a couple of cases where participants have been wrongly charged by officers.
"My concern is, what is the scientific value in handing out needles beyond the permitted amount of 20 or below?" Kelly said.
Chicago Recovery Alliance Executive Director Dan Bigg said research shows needle exchange participants will pick up needles for their acquaintances, therefore spreading the use of clean needles and preventing disease.
Why don't addicts just buy their supplies from pharmacies?
Weiss said he dreaded that awkward purchase so much he would find someone who didn't look like a junkie to buy needles for him. Also, some addicts may also be reluctant to spend money on needles that could otherwise be used to buy drugs.
"The bottom line is you want me to have this," Weiss said. "It's a community health risk to not have this."
HAL to provide tech support to Nashik firms
Aircraft manufacturer Hindustan Aeronautics Ltd said it is planning to outsource maximum aircraft components to Nashik industries and will provide support for all technology and tooling solutions to its selected vendors.
A business meet between HAL and Small & Medium Enterprises was held in Nashik at the mega industrial exhibition NIMA Index: 2012 with an aim to outsource maximum aircraft components in the region. The expo is being held at the Dongre Hostel grounds in Nashik.Find everything you need to know about kidney stone including causes, Around 70 entrepreneurs participated in the business meet. HAL manufactures defense aircraft at its Ozar plant near Nashik. The aircraft that are manufactured here include Su-30 MKI,Find out the facts about Cold Sore, MiG-27 M , MiG-21 Variants .
"We are already outsourcing aircraft components in large numbers from Bangalore and Hyderabad. But, outsourcing components to industries in Bangalore and Hyderabad is not feasible logistically. Hence, we are planning to outsource maximum aircraft components from Nashik industries. We already have around 15-20 vendors in Nashik. The selected vendors from Nashik will be provided with the technology and tooling solutions," said GSR Prasad, deputy general manager, HAL.
"We already have skilled manpower doing the work, but there are some areas where we are looking for outsourcing. The components we require include CNC machines, sheet metals,Choose from our large selection of Cable Ties, electrical looms, rubber components, typical hydraulic service trolleys,External Hemroids are those that occur below the dentate line. tooling and ground handling equipments," he said.Thank you for visiting our newly improved DIY chicken coop website!
Some vendors from Nashik, including Panchal Engineering, Navkar Technology etc., also gave power point presentations to HAL officials.
A business meet between HAL and Small & Medium Enterprises was held in Nashik at the mega industrial exhibition NIMA Index: 2012 with an aim to outsource maximum aircraft components in the region. The expo is being held at the Dongre Hostel grounds in Nashik.Find everything you need to know about kidney stone including causes, Around 70 entrepreneurs participated in the business meet. HAL manufactures defense aircraft at its Ozar plant near Nashik. The aircraft that are manufactured here include Su-30 MKI,Find out the facts about Cold Sore, MiG-27 M , MiG-21 Variants .
"We are already outsourcing aircraft components in large numbers from Bangalore and Hyderabad. But, outsourcing components to industries in Bangalore and Hyderabad is not feasible logistically. Hence, we are planning to outsource maximum aircraft components from Nashik industries. We already have around 15-20 vendors in Nashik. The selected vendors from Nashik will be provided with the technology and tooling solutions," said GSR Prasad, deputy general manager, HAL.
"We already have skilled manpower doing the work, but there are some areas where we are looking for outsourcing. The components we require include CNC machines, sheet metals,Choose from our large selection of Cable Ties, electrical looms, rubber components, typical hydraulic service trolleys,External Hemroids are those that occur below the dentate line. tooling and ground handling equipments," he said.Thank you for visiting our newly improved DIY chicken coop website!
Some vendors from Nashik, including Panchal Engineering, Navkar Technology etc., also gave power point presentations to HAL officials.
Just Choose PTMS Plastic Mould Is Your Best Choice!
"We are already supplying to Mahindra Sona, Crompton Greaves and Kent Introl Ltd. Of total installed capacity, we are utilizing 70 per cent of the capacity while rest of the 30 per cents is to be utilized for the companies like HAL which have earned a status of 'Navratna'," Nikhil Panchal of Panchal Engineering said.
"Earlier, the products were manufactured here and their finishing was done at Bangalore. But today's new generation is manufacturing quality products and exporting to the other countries," he said.
"We are already supplying to Mahindra Sona, Crompton Greaves and Kent Introl Ltd. Of total installed capacity, we are utilizing 70 per cent of the capacity while rest of the 30 per cents is to be utilized for the companies like HAL which have earned a status of 'Navratna'," Nikhil Panchal of Panchal Engineering said.
"Earlier, the products were manufactured here and their finishing was done at Bangalore. But today's new generation is manufacturing quality products and exporting to the other countries," he said.
Struggling RI city's history marked with candy bar
Mike Ritz is trying to help save Central Falls — one chocolate bar at a time.
While Central Falls is often called a "failed city" that was taken over by the state and later filed for bankruptcy, a new project is highlighting a very different story: its history as a chocolate manufacturer during the late 18th and early 19th centuries.
Ritz says the "Save Chocolateville" bar — honoring Central Falls' nickname — recalls the tale of an American city that once thrived as a manufacturer, sank into decline and is trying to turn itself around. Proceeds will go to a yet-undecided program benefiting city children.
"Chocolateville to me represents the spirit of ingenuity, entrepreneurship, productivity, and — when that first mill building was created there — it was the heart of the community," said Ritz, who heads the organization Leadership Rhode Island. The old Wheat chocolate factory that operated along the Blackstone River is pictured on the chocolate bar's label.
"The bar will make some money for the kids, no doubt. But it's almost more important that the bar gets distributed ..Museum Quality hand-painted oil painting reproduction on canvas.. so that it can tell the story of Chocolateville and Central Falls," he added. "To me, it's the story of America in one square mile. The bar itself is just a calling card to tell that story."
The bars are being made right in Central Falls by Andrew Shotts,Can't afford a third party merchant account right now? a well-regarded chocolatier who worked previously as a pastry chef in New York City, including at the Russian Tea Room. He relocated to Providence in 2003 and moved three years later to a 7,000-square-foot manufacturing facility in Central Falls, where he produced the latest batch of Save Chocolateville bars last week.
"It doesn't take a rocket scientist to figure out that Central Falls is in trouble,What causes TMJ pain?" said Shotts. "To try to help the city, get it back to where it was, is a good thing. That's why I'm doing it."
The 3.5-ounce bars, which went on sale this month at a Whole Foods in Providence, cost $5, a portion of which goes to cover Shotts' costs. More than 700 have been sold.
While Central Falls is often called a "failed city" that was taken over by the state and later filed for bankruptcy, a new project is highlighting a very different story: its history as a chocolate manufacturer during the late 18th and early 19th centuries.
Ritz says the "Save Chocolateville" bar — honoring Central Falls' nickname — recalls the tale of an American city that once thrived as a manufacturer, sank into decline and is trying to turn itself around. Proceeds will go to a yet-undecided program benefiting city children.
"Chocolateville to me represents the spirit of ingenuity, entrepreneurship, productivity, and — when that first mill building was created there — it was the heart of the community," said Ritz, who heads the organization Leadership Rhode Island. The old Wheat chocolate factory that operated along the Blackstone River is pictured on the chocolate bar's label.
"The bar will make some money for the kids, no doubt. But it's almost more important that the bar gets distributed ..Museum Quality hand-painted oil painting reproduction on canvas.. so that it can tell the story of Chocolateville and Central Falls," he added. "To me, it's the story of America in one square mile. The bar itself is just a calling card to tell that story."
The bars are being made right in Central Falls by Andrew Shotts,Can't afford a third party merchant account right now? a well-regarded chocolatier who worked previously as a pastry chef in New York City, including at the Russian Tea Room. He relocated to Providence in 2003 and moved three years later to a 7,000-square-foot manufacturing facility in Central Falls, where he produced the latest batch of Save Chocolateville bars last week.
"It doesn't take a rocket scientist to figure out that Central Falls is in trouble,What causes TMJ pain?" said Shotts. "To try to help the city, get it back to where it was, is a good thing. That's why I'm doing it."
The 3.5-ounce bars, which went on sale this month at a Whole Foods in Providence, cost $5, a portion of which goes to cover Shotts' costs. More than 700 have been sold.
Just Choose PTMS Injection Mold Is Your Best Choice!
Said Shotts: "We're going to just keep making them and selling them."
Ritz said a local credit union has ordered 200 and the travel agency AAA is likely to buy several hundred as well to sell at its busiest branches. He also said he has had conversations with CVS, based in Woonsocket, about sales in its stores, which could bring a much broader distribution.
The settlement that became Central Falls was known as a regional center of chocolate manufacturer during early industrialization along the Blackstone River, according to a history on the website of the Confectioners Mill Preservation Society. The Wheat Chocolate Mill was that of William Wheat, a trader, innkeeper and chocolate maker who is said to have relocated his factory from Providence to a spot in Central Falls around 1782.
Most of the mill's chocolate was bought and consumed locally, but the preservation society said some also likely made its way onto whaling ships, fishing vessels and warships. Some may have been used as military provisions as well, as hot cocoa was considered to have a medicinal quality.
The history quotes an 1854 Providence Journal article as saying the two-story mill was "seriously injured" during a flood in 1807 and that all traces of it were gone by around 1834.
The preservation society, a nonprofit that researches and supports the preservation of old chocolate mills, had plans to rebuild the old Wheat mill and turn it into a museum. But that project — expected to cost $12 million — was shelved because of the sour economy,Low prices on projector bulbs from Projector Lamp London UK. said Robert Billington, executive director of the Blackstone Valley Tourism Council.
Now the tourism council is raising money for what's known as the Chocolate Mill Overlook on a city-owned parcel along the river. It's slated to be an interactive park that highlights Central Falls' history as Chocolateville.
"Central Falls really has the right and the privilege to tell a story that's no one else's in Rhode Island," said Billington, the park administrator.
About $18,000 toward a $35,000 matching grant from chocolate maker Mars Inc., a major donor to the preservation society, has been raised so far, he said. The park is expected to be complete in May.
Ritz said his chocolate bar project — separate from plans for the park — is part of a broader effort at Leadership Rhode Island to help revitalize Central Falls. He recently dressed up as Willy Wonka, the fictional character from "Charlie and the Chocolate Factory,Official web site for Uwe cube puzzle and novelties," and handed out the bars at the state's major philanthropic organization, the Rhode Island Foundation, from which he's seeking a grant for his organization's larger work.
"Central Falls, because of all the negative attention it's gotten over the last few years, it's a heavy sort of thing to think about," said Ritz. "By playing with the history of it, it lightens it, and it also brings back this sense of Americana."
Said Shotts: "We're going to just keep making them and selling them."
Ritz said a local credit union has ordered 200 and the travel agency AAA is likely to buy several hundred as well to sell at its busiest branches. He also said he has had conversations with CVS, based in Woonsocket, about sales in its stores, which could bring a much broader distribution.
The settlement that became Central Falls was known as a regional center of chocolate manufacturer during early industrialization along the Blackstone River, according to a history on the website of the Confectioners Mill Preservation Society. The Wheat Chocolate Mill was that of William Wheat, a trader, innkeeper and chocolate maker who is said to have relocated his factory from Providence to a spot in Central Falls around 1782.
Most of the mill's chocolate was bought and consumed locally, but the preservation society said some also likely made its way onto whaling ships, fishing vessels and warships. Some may have been used as military provisions as well, as hot cocoa was considered to have a medicinal quality.
The history quotes an 1854 Providence Journal article as saying the two-story mill was "seriously injured" during a flood in 1807 and that all traces of it were gone by around 1834.
The preservation society, a nonprofit that researches and supports the preservation of old chocolate mills, had plans to rebuild the old Wheat mill and turn it into a museum. But that project — expected to cost $12 million — was shelved because of the sour economy,Low prices on projector bulbs from Projector Lamp London UK. said Robert Billington, executive director of the Blackstone Valley Tourism Council.
Now the tourism council is raising money for what's known as the Chocolate Mill Overlook on a city-owned parcel along the river. It's slated to be an interactive park that highlights Central Falls' history as Chocolateville.
"Central Falls really has the right and the privilege to tell a story that's no one else's in Rhode Island," said Billington, the park administrator.
About $18,000 toward a $35,000 matching grant from chocolate maker Mars Inc., a major donor to the preservation society, has been raised so far, he said. The park is expected to be complete in May.
Ritz said his chocolate bar project — separate from plans for the park — is part of a broader effort at Leadership Rhode Island to help revitalize Central Falls. He recently dressed up as Willy Wonka, the fictional character from "Charlie and the Chocolate Factory,Official web site for Uwe cube puzzle and novelties," and handed out the bars at the state's major philanthropic organization, the Rhode Island Foundation, from which he's seeking a grant for his organization's larger work.
"Central Falls, because of all the negative attention it's gotten over the last few years, it's a heavy sort of thing to think about," said Ritz. "By playing with the history of it, it lightens it, and it also brings back this sense of Americana."
2012年2月23日 星期四
Woman Shot In Downtown El Paso By Bullet From Mexico Speaks About Incident
Maria Romero was enjoying Tuesday morning shopping in Downtown El Paso with her grandson, Santiago,Welcome to the online guide for do-it-yourself Ceramic tile. when her life changed and she became a national story.
Romero was walking on Overland Street when she heard a loud pop and then felt pain in her left leg. That pain was from a gunshot wound from a bullet El Paso Police believe came from a shootout at the same time in Juarez.
Shortly after 5 p.m. Wednesday, Maria arrived at her Lower Valley home. She exited the vehicle on crutches.
"There really isn't anyone to blame,Your source for re-usable Plastic moulds of strong latex rubber." Maria said in Spanish about what happened.
Bryan Romero, Romero's son, said she was pushing her 1-year-old grandson in a baby carriage, shopping for molds because she bakes cakes and sells them. Santiago was not injured.
"Thank God hit me and not the baby," said Maria Romero.
Romero said she screamed when she heard a loud pop and saw blood running down her leg. "I never imagined something like this would happen in the United States," said Romero. Just Choose PTMS plastic injection mould Is Your Best Choice!
Romero moved to El Paso from Ciudad Juarez about five years ago and now lives about a block away from the border fence. She said the incident has not made her feel unsafe, but she is still shaken by the experience.
"Now I feel fortunate and with a greater will to live,The Transaction Group offers the best high risk merchant account services," said Romero.
El Paso Police Chief Greg Allen said Tuesday afternoon that a bullet that punctured Maria's calf in Downtown El Paso Tuesday morning is believed to have come from Mexico.
Romero said police told her if the bullet had been fired from a close proximity, her leg would have been shattered due to the calibur of the bullet.
"We do take this extremely seriously," El Paso Mayor John Cook said on Tuesday. "This is another difficulty for El Paso and the border region when we're trying to highlight how safe our community is. This is still a great place to live."
El Paso Sheriff's Office Commander Gomecindo Lopez called the shooting "highly disturbing."
Guillen Middle School, Aoy Elementary and Hart Elementary were put on lockdown from 11 a.m. to 11:30 a.m. following the shooting Tuesday.
This is not the first time that a bullet from Mexico has been fired into El Paso.
A bullet struck Bell Hall on the UTEP campus on the evening of Aug. 21, 2010. Nobody was injured and UTEP Police believe the bullet may have been related to a shootout in Juarez, Mexico that occurred at the same time. The shooting resulted in the temporary closure of Paisano Drive from Executive Center to Santa Fe Street in El Paso. One person was killed in the shootout in Juarez. There were no reported injures in El Paso.
At about 5 p.Our guides provide customers with information about porcelain tiles vs.m. June 29,Sharps include syringe needle, 2010 a bullet traveled from a shootout in Juarez through a ninth floor window of El Paso City Hall, then through an interior wall, before striking a picture frame and stopping. Further investigation revealed that the north and south stucco walls of City Hall were struck by an additional six rounds at varying heights on the walls. El Paso City Hall did not appear to be the specific target of the rounds. City employees were inside City Hall during the incident. There were no reported injuries in El Paso from the incident.
Romero was walking on Overland Street when she heard a loud pop and then felt pain in her left leg. That pain was from a gunshot wound from a bullet El Paso Police believe came from a shootout at the same time in Juarez.
Shortly after 5 p.m. Wednesday, Maria arrived at her Lower Valley home. She exited the vehicle on crutches.
"There really isn't anyone to blame,Your source for re-usable Plastic moulds of strong latex rubber." Maria said in Spanish about what happened.
Bryan Romero, Romero's son, said she was pushing her 1-year-old grandson in a baby carriage, shopping for molds because she bakes cakes and sells them. Santiago was not injured.
"Thank God hit me and not the baby," said Maria Romero.
Romero said she screamed when she heard a loud pop and saw blood running down her leg. "I never imagined something like this would happen in the United States," said Romero. Just Choose PTMS plastic injection mould Is Your Best Choice!
Romero moved to El Paso from Ciudad Juarez about five years ago and now lives about a block away from the border fence. She said the incident has not made her feel unsafe, but she is still shaken by the experience.
"Now I feel fortunate and with a greater will to live,The Transaction Group offers the best high risk merchant account services," said Romero.
El Paso Police Chief Greg Allen said Tuesday afternoon that a bullet that punctured Maria's calf in Downtown El Paso Tuesday morning is believed to have come from Mexico.
Romero said police told her if the bullet had been fired from a close proximity, her leg would have been shattered due to the calibur of the bullet.
"We do take this extremely seriously," El Paso Mayor John Cook said on Tuesday. "This is another difficulty for El Paso and the border region when we're trying to highlight how safe our community is. This is still a great place to live."
El Paso Sheriff's Office Commander Gomecindo Lopez called the shooting "highly disturbing."
Guillen Middle School, Aoy Elementary and Hart Elementary were put on lockdown from 11 a.m. to 11:30 a.m. following the shooting Tuesday.
This is not the first time that a bullet from Mexico has been fired into El Paso.
A bullet struck Bell Hall on the UTEP campus on the evening of Aug. 21, 2010. Nobody was injured and UTEP Police believe the bullet may have been related to a shootout in Juarez, Mexico that occurred at the same time. The shooting resulted in the temporary closure of Paisano Drive from Executive Center to Santa Fe Street in El Paso. One person was killed in the shootout in Juarez. There were no reported injures in El Paso.
At about 5 p.Our guides provide customers with information about porcelain tiles vs.m. June 29,Sharps include syringe needle, 2010 a bullet traveled from a shootout in Juarez through a ninth floor window of El Paso City Hall, then through an interior wall, before striking a picture frame and stopping. Further investigation revealed that the north and south stucco walls of City Hall were struck by an additional six rounds at varying heights on the walls. El Paso City Hall did not appear to be the specific target of the rounds. City employees were inside City Hall during the incident. There were no reported injuries in El Paso from the incident.
Train ignited tar buildup in ventilation shaft of Old Post Office
A small fire at the old Main Post Office over the weekend was caused by a passing or idling train that ignited built-up tar in a ventilation shaft, a Chicago Fire Department spokesman said this morning.
The blaze flared up the shaft of the long-closed building at 433 W. Van Buren St. and spread to the roof and 10th floor Friday night.
The old post office, closed in 1995, sits above portions of Union Station and its south platforms and tracks. The Fire Deparment's Office of Fire Investigations has determined that embers or flames from the stack of a train ignited tar and other byproducts that have built up in the shaft from years of trains passing and idling underneath, according to Fire Department spokesman Larry Langford.
The Fire Department, however, "reserves final judgment pending a full electrical and mechanical inspection of the ventilation system," Langford said in a statement.Welcome to the online guide for do-it-yourself Ceramic tile.
Amtrak and the owner of the post office are already feuding over fumes from diesel trains. Amtrak says the fumes build up in Union Station because the building is poorly ventilated.
Earlier this month, Amtrak earlier this month sued the owner of the building -- International Property Developers North America Inc. -- claiming that “refusal to maintain its ventilation system below the Old Post Office" was exposing passengers to a heavy dose of fumes. Just Choose PTMS plastic injection mold Is Your Best Choice!
But International Property Developers North America said the fault was with Amtrak, blaming “trains idling for prolonged periods under the old post office.”
While a train appears to have ignited the weekend fire,Here's a complete list of oil painting supplies for the beginning oil painter. Amtrak spokesman Marc Magliari noted that the allegations in the lawsuit include a lack of maintenance of the old post office ventilation system since IPD bought the building in 2009.
But Martin Mulryan, project manager for the IPD at the post office, said the ventilation system is regularly maintained. “The cleaning of soot and creosote is part of an ongoing maintenance issue and they are cleaned four times per year," Martin said in an email.Our guides provide customers with information about porcelain tiles vs.
“IPD have staff at the building and are reviewing the cleaning regime this week to see if increasing the cleaning frequency would help,” he added.
However, just two days before the fire IPD “at the request of Union Station increased the ventilation ... and this increased ventilation may have helped keep burning embers alight,” he suggested.The Transaction Group offers the best high risk merchant account services,
Mulryan said trains need to “to shut down their engines. . .Sharps include syringe needle,in the station” and eventually need to be replaced with more efficient trains with better control of flames from their stacks.
The blaze flared up the shaft of the long-closed building at 433 W. Van Buren St. and spread to the roof and 10th floor Friday night.
The old post office, closed in 1995, sits above portions of Union Station and its south platforms and tracks. The Fire Deparment's Office of Fire Investigations has determined that embers or flames from the stack of a train ignited tar and other byproducts that have built up in the shaft from years of trains passing and idling underneath, according to Fire Department spokesman Larry Langford.
The Fire Department, however, "reserves final judgment pending a full electrical and mechanical inspection of the ventilation system," Langford said in a statement.Welcome to the online guide for do-it-yourself Ceramic tile.
Amtrak and the owner of the post office are already feuding over fumes from diesel trains. Amtrak says the fumes build up in Union Station because the building is poorly ventilated.
Earlier this month, Amtrak earlier this month sued the owner of the building -- International Property Developers North America Inc. -- claiming that “refusal to maintain its ventilation system below the Old Post Office" was exposing passengers to a heavy dose of fumes. Just Choose PTMS plastic injection mold Is Your Best Choice!
But International Property Developers North America said the fault was with Amtrak, blaming “trains idling for prolonged periods under the old post office.”
While a train appears to have ignited the weekend fire,Here's a complete list of oil painting supplies for the beginning oil painter. Amtrak spokesman Marc Magliari noted that the allegations in the lawsuit include a lack of maintenance of the old post office ventilation system since IPD bought the building in 2009.
But Martin Mulryan, project manager for the IPD at the post office, said the ventilation system is regularly maintained. “The cleaning of soot and creosote is part of an ongoing maintenance issue and they are cleaned four times per year," Martin said in an email.Our guides provide customers with information about porcelain tiles vs.
“IPD have staff at the building and are reviewing the cleaning regime this week to see if increasing the cleaning frequency would help,” he added.
However, just two days before the fire IPD “at the request of Union Station increased the ventilation ... and this increased ventilation may have helped keep burning embers alight,” he suggested.The Transaction Group offers the best high risk merchant account services,
Mulryan said trains need to “to shut down their engines. . .Sharps include syringe needle,in the station” and eventually need to be replaced with more efficient trains with better control of flames from their stacks.
Setting up a laundry room for wash-and-dry efficiency
I was going to write about Raise, a stain remover, but the suggestions for designing an efficient laundry room were so good that I thought I'd share some of them with you.
I haven't thought about this for a few years, because our laundry-room setup works well, and the front-loading washer and dryer that we bought in 2006 to replace the 22-year-old models we inherited have given us little trouble.Distributes and manufactures RUBBER SHEET,
Even when I had considered replacing the clunky old sink into which the washer drains with one of those white plastic tubs, the plumbing changes would have been pricey and the drainage is all that we ask it to do anyway.
Choose a smart layout. Don't position washers, dryers, ironing boards, and other things behind doors or in awkward corners. Just Choose PTMS Injection Molding Is Your Best Choice!
If you purchase front-loading washers and dryers, consider pedestals to raise them up and make access easier.
When choosing flooring, avoid wood or ceramic tile and go for something durable like porcelain tile (unglazed to prevent slipping when wet).
Evaluate how much washing you're doing these days. If you're not using the most efficient machines for your needs, new ones may actually save you money.Our guides provide customers with information about porcelain tiles vs.
When buying new machines, always investigate how much electricity they will use in a year. Other design features that help save energy include water-level controls, moisture sensors, and spin-cycle adjustments.
If you can afford it, built-in cabinets and shelves are smart (and can even add to a home's value), but there are plenty of inexpensive free-standing or between-the-washer-and-dryer caddies, cabinets, organizers and bins.
Consider a foldout or hideaway ironing board. Having an ironing board set up all the time takes up a lot of space. There are a lot of models that are meant to hide behind the door or fold up on the wall when not in use.
Designate baskets for darks, lights, and dry-cleaning so everyone can help sort clothes. Have canvas-lined baskets embroidered, or label them with a fabric marker. Discount and specialty stores sell rolling carts with divided bins. Use adhesive felt letters to label each one, so everyone knows what goes where.
Q: I have a high-efficiency gas furnace in the basement with one exhaust pipe to the outside to vent the steam/exhaust gases.
To fire the gas, it draws air from the air surrounding the furnace,Here's a complete list of oil painting supplies for the beginning oil painter. not through a second pipe to the outside as is done today. The air required to fire the furnace is enough so that there is a noticeable draw of air into the basement. If the basement door is ajar, it will close from the draft created when the furnace is on.
I have finally realized that this draw of interior air to combust the furnace gas creates a "negative" pressure in the house. It's why, in the winter, I have points of cold air wafting in from around exterior doors.
Can this furnace be retrofitted to have a second pipe to draw air from the outside, thereby not creating the negative air pressure that draws in cold air from the outside?
A: I've not seen your furnace, but if it is high-efficiency, then it is similar to mine, which does have the second PVC pipe through the exterior basement wall drawing air for combustion from the outside.
I think it is possible to retrofit the furnace,The Transaction Group offers the best high risk merchant account services, but that's something you'll need to have looked at by a professional.Welcome to the online guide for do-it-yourself Ceramic tile. From my reading, there are more dangers to using air from the interior than the door shutting.
Indoor air can contain small amounts of bleach and ammonia. These and other chemicals have been known to significantly erode the heat exchangers in these mid- to high-efficiency units.
Another issue is whether the location of the furnace is too close to the laundry equipment. Laundry detergents also are known to degrade heat exchangers.
Also, the lint from the clothes dryer can enter the furnace and cause damage and in some cases become a fire hazard.
I haven't thought about this for a few years, because our laundry-room setup works well, and the front-loading washer and dryer that we bought in 2006 to replace the 22-year-old models we inherited have given us little trouble.Distributes and manufactures RUBBER SHEET,
Even when I had considered replacing the clunky old sink into which the washer drains with one of those white plastic tubs, the plumbing changes would have been pricey and the drainage is all that we ask it to do anyway.
Choose a smart layout. Don't position washers, dryers, ironing boards, and other things behind doors or in awkward corners. Just Choose PTMS Injection Molding Is Your Best Choice!
If you purchase front-loading washers and dryers, consider pedestals to raise them up and make access easier.
When choosing flooring, avoid wood or ceramic tile and go for something durable like porcelain tile (unglazed to prevent slipping when wet).
Evaluate how much washing you're doing these days. If you're not using the most efficient machines for your needs, new ones may actually save you money.Our guides provide customers with information about porcelain tiles vs.
When buying new machines, always investigate how much electricity they will use in a year. Other design features that help save energy include water-level controls, moisture sensors, and spin-cycle adjustments.
If you can afford it, built-in cabinets and shelves are smart (and can even add to a home's value), but there are plenty of inexpensive free-standing or between-the-washer-and-dryer caddies, cabinets, organizers and bins.
Consider a foldout or hideaway ironing board. Having an ironing board set up all the time takes up a lot of space. There are a lot of models that are meant to hide behind the door or fold up on the wall when not in use.
Designate baskets for darks, lights, and dry-cleaning so everyone can help sort clothes. Have canvas-lined baskets embroidered, or label them with a fabric marker. Discount and specialty stores sell rolling carts with divided bins. Use adhesive felt letters to label each one, so everyone knows what goes where.
Q: I have a high-efficiency gas furnace in the basement with one exhaust pipe to the outside to vent the steam/exhaust gases.
To fire the gas, it draws air from the air surrounding the furnace,Here's a complete list of oil painting supplies for the beginning oil painter. not through a second pipe to the outside as is done today. The air required to fire the furnace is enough so that there is a noticeable draw of air into the basement. If the basement door is ajar, it will close from the draft created when the furnace is on.
I have finally realized that this draw of interior air to combust the furnace gas creates a "negative" pressure in the house. It's why, in the winter, I have points of cold air wafting in from around exterior doors.
Can this furnace be retrofitted to have a second pipe to draw air from the outside, thereby not creating the negative air pressure that draws in cold air from the outside?
A: I've not seen your furnace, but if it is high-efficiency, then it is similar to mine, which does have the second PVC pipe through the exterior basement wall drawing air for combustion from the outside.
I think it is possible to retrofit the furnace,The Transaction Group offers the best high risk merchant account services, but that's something you'll need to have looked at by a professional.Welcome to the online guide for do-it-yourself Ceramic tile. From my reading, there are more dangers to using air from the interior than the door shutting.
Indoor air can contain small amounts of bleach and ammonia. These and other chemicals have been known to significantly erode the heat exchangers in these mid- to high-efficiency units.
Another issue is whether the location of the furnace is too close to the laundry equipment. Laundry detergents also are known to degrade heat exchangers.
Also, the lint from the clothes dryer can enter the furnace and cause damage and in some cases become a fire hazard.
Chicago's Oscar Gold
Sunday is Oscar night. And as Hollywood prepares to see who takes home the biggest prize,The Transaction Group offers the best high risk merchant account services, we take a look at where that prize is made.Listing of Taiwan & China Mold Maker manufacturer & suppliers. Ash-har Quraishi gives us an inside peek at the Chicago company that literally makes Oscar gold.
Before Hollywood's most coveted golden statuette makes its way into the hands of an Oscar winner, it has to be made -- and that happens right here in Chicago.
For the last 30 years, Chicago-based R.S. Owens & Company has been making the Academy Award of Merit, better known as “Oscar,” at Owens’ North Side manufacturing facility.
Founded in 1938 by Owen Siegel, the company is now run by his son, Scott Siegel.
Siegel says the Oscars came to R.S. Owens after the previous maker went out of business in the early 1980s.
“They told the Motion Picture Academy that they were no longer manufacturing awards and recommended us, which was quite nice,” said Siegel. “We were already manufacturing the Emmys at that time. We were union so we had some street credibility, so the Motion Picture Academy gave us a shot.” Just Choose PTMS Plastic Mould Is Your Best Choice!
It takes 10 skilled artisans about 5 hours to make the Oscar.
They begin by casting the award in a special alloy developed specifically for Oscar, called Britannium.
Next, the finished mold is cleaned up and buffed to a mirror-like shine.
“I think the most difficult part is when you go in polishing. Because you can polish it and make it beautiful and bright,Here's a complete list of oil painting supplies for the beginning oil painter. but sometimes you have pinholes here, little scratch. And, for me, that’s the most difficult part because you have to be 200 percent,” said Plant Manager Jorge Marroquin.
It will then be dipped in a series of electroplating processes to help arrive at the final finish.
The statue is plated in copper, nickel, silver, and finally, 24-karat gold, and will be buffed once again for about an hour.
Every Oscar gets its own serial number.
“This is the old engraving system. This is where we put the serial numbers on the Oscar statuette itself,” said R.S. Owens worker Louise White.
Interestingly, the company makes engraved plates for all of the nominees to keep the winner a secret. The final plate is added after the winner is announced.
By this time, the award is handled with white gloves only, and prepared for packing and shipping to Los Angeles.
And while R.S. Owens is most famous for making the Oscar statuette, it is just one of many prestigious awards manufactured right here in Chicago.
Owens has produced some of the most well-known trophies on the planet, including the MTV Music Award and the Primetime Emmy.
When the creators of American Idol realized they needed their own signature award after seven seasons, R.S. Owens was the obvious choice to design and manufacture the prize.
“We’ve created some amazing, amazing awards,” Siegel said. “And what I love to hear from our customers is that our awards exceed their expectations, that they get it and they’re just so pleased and so wowed by what we’re able to accomplish here.”
In 2010, they were asked by the makers of AMC’s Emmy award-winning drama, Mad Men, to produce a replica of the 1964 Clio Award for excellence in advertising -- for use on the show.
While the company uses the latest in manufacturing technology, it prides itself on traditional hand-crafted artistry.
“We’re one of the last manufacturers of awards in the United States,” Siegel said. “We’re probably the only manufacturer of our kind that’s pretty much full service, from design to making molds, and casting and fabricating out of aluminum, brass and crystal. So, we’re like the last company standing."
But,Distributes and manufactures RUBBER SHEET, even being the most well-known prize maker in the world doesn’t make Owens immune from cheaper products manufactured by competitors overseas.
“A lot of the business has gone over to China,” Siegel said. “And we hope that we’ll be around for a long time because we can deliver much more quickly than China can.All RUBBER MATS is comprised of all types of mats, We can guarantee quality which China can’t, and we can guarantee safety.”
Before Hollywood's most coveted golden statuette makes its way into the hands of an Oscar winner, it has to be made -- and that happens right here in Chicago.
For the last 30 years, Chicago-based R.S. Owens & Company has been making the Academy Award of Merit, better known as “Oscar,” at Owens’ North Side manufacturing facility.
Founded in 1938 by Owen Siegel, the company is now run by his son, Scott Siegel.
Siegel says the Oscars came to R.S. Owens after the previous maker went out of business in the early 1980s.
“They told the Motion Picture Academy that they were no longer manufacturing awards and recommended us, which was quite nice,” said Siegel. “We were already manufacturing the Emmys at that time. We were union so we had some street credibility, so the Motion Picture Academy gave us a shot.” Just Choose PTMS Plastic Mould Is Your Best Choice!
It takes 10 skilled artisans about 5 hours to make the Oscar.
They begin by casting the award in a special alloy developed specifically for Oscar, called Britannium.
Next, the finished mold is cleaned up and buffed to a mirror-like shine.
“I think the most difficult part is when you go in polishing. Because you can polish it and make it beautiful and bright,Here's a complete list of oil painting supplies for the beginning oil painter. but sometimes you have pinholes here, little scratch. And, for me, that’s the most difficult part because you have to be 200 percent,” said Plant Manager Jorge Marroquin.
It will then be dipped in a series of electroplating processes to help arrive at the final finish.
The statue is plated in copper, nickel, silver, and finally, 24-karat gold, and will be buffed once again for about an hour.
Every Oscar gets its own serial number.
“This is the old engraving system. This is where we put the serial numbers on the Oscar statuette itself,” said R.S. Owens worker Louise White.
Interestingly, the company makes engraved plates for all of the nominees to keep the winner a secret. The final plate is added after the winner is announced.
By this time, the award is handled with white gloves only, and prepared for packing and shipping to Los Angeles.
And while R.S. Owens is most famous for making the Oscar statuette, it is just one of many prestigious awards manufactured right here in Chicago.
Owens has produced some of the most well-known trophies on the planet, including the MTV Music Award and the Primetime Emmy.
When the creators of American Idol realized they needed their own signature award after seven seasons, R.S. Owens was the obvious choice to design and manufacture the prize.
“We’ve created some amazing, amazing awards,” Siegel said. “And what I love to hear from our customers is that our awards exceed their expectations, that they get it and they’re just so pleased and so wowed by what we’re able to accomplish here.”
In 2010, they were asked by the makers of AMC’s Emmy award-winning drama, Mad Men, to produce a replica of the 1964 Clio Award for excellence in advertising -- for use on the show.
While the company uses the latest in manufacturing technology, it prides itself on traditional hand-crafted artistry.
“We’re one of the last manufacturers of awards in the United States,” Siegel said. “We’re probably the only manufacturer of our kind that’s pretty much full service, from design to making molds, and casting and fabricating out of aluminum, brass and crystal. So, we’re like the last company standing."
But,Distributes and manufactures RUBBER SHEET, even being the most well-known prize maker in the world doesn’t make Owens immune from cheaper products manufactured by competitors overseas.
“A lot of the business has gone over to China,” Siegel said. “And we hope that we’ll be around for a long time because we can deliver much more quickly than China can.All RUBBER MATS is comprised of all types of mats, We can guarantee quality which China can’t, and we can guarantee safety.”
2012年2月21日 星期二
Postpartum moms can suffer from digestive issues
New moms are often surprised when they experience a bout of consDistributes and manufactures RUBBER SHEET,tipation after giving birth, unaware that this is actually a very common postpartum complaint.Listing of Taiwan & China Mold Maker manufacturer & suppliers.
Many women may experience constipation following childbirth, due to the slowdown of the digestive system and temporary loss of muscle tone in the abdomen. But there are other explanations. Factors that may contribute to constipation include: medications administered for postpartum pain, prenatal vitamins continued while breast feeding and anesthesia administered during labor. Just Choose PTMS Injection Molding Is Your Best Choice!
A fear of pushing can also cause a cycle of constipation. New moms may be hesitant to strain themselves because of post-childbirth tenderness,All RUBBER MATS is comprised of all types of mats, fear of tearing a stitch or pain from hemorrhoids. C-sections can also contribute.
Mothers should know that this situation is very common. In one survey of about 1,000 new moms conducted by Russell Research in collaboration with Purdue Products, the makers of Colace Capsules, it was found that 47 percent of new moms experienced constipation or other digestive issues after giving birth, and 89 percent of those mothers experienced problems with bowel movements in the days immediately after childbirth.
There are many ways to combat this issue. While it may be hard to get back into gear after the ordeal your body has just been through, it may help to exercise a little each day once you have been told by your doctor that it's okay. Adequate daily fiber is also key to keeping away constipation. Eating bran muffins, high-fiber cereal and lots of fruits and vegetables is a great way to make sure you're getting your daily intake. It is also important to drink plenty of fluids.
According to the survey, 77 percent of new mothers with constipation took aOnline fine art gallery of quality original landscape oil paintings, stool softener, such as Colace Capsules. Since the active ingredient is docusate sodium, Colace Capsules help avoid the painful straining associated with occasional constipation.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. Colace Capsules is the leading product recommended by doctors and pharmacists to provide reliable relief. Of course, if you are pregnant or nursing, you should consult with your doctor before use, and remember to tell your doctor about any other medications you are taking.
Many women may experience constipation following childbirth, due to the slowdown of the digestive system and temporary loss of muscle tone in the abdomen. But there are other explanations. Factors that may contribute to constipation include: medications administered for postpartum pain, prenatal vitamins continued while breast feeding and anesthesia administered during labor. Just Choose PTMS Injection Molding Is Your Best Choice!
A fear of pushing can also cause a cycle of constipation. New moms may be hesitant to strain themselves because of post-childbirth tenderness,All RUBBER MATS is comprised of all types of mats, fear of tearing a stitch or pain from hemorrhoids. C-sections can also contribute.
Mothers should know that this situation is very common. In one survey of about 1,000 new moms conducted by Russell Research in collaboration with Purdue Products, the makers of Colace Capsules, it was found that 47 percent of new moms experienced constipation or other digestive issues after giving birth, and 89 percent of those mothers experienced problems with bowel movements in the days immediately after childbirth.
There are many ways to combat this issue. While it may be hard to get back into gear after the ordeal your body has just been through, it may help to exercise a little each day once you have been told by your doctor that it's okay. Adequate daily fiber is also key to keeping away constipation. Eating bran muffins, high-fiber cereal and lots of fruits and vegetables is a great way to make sure you're getting your daily intake. It is also important to drink plenty of fluids.
According to the survey, 77 percent of new mothers with constipation took aOnline fine art gallery of quality original landscape oil paintings, stool softener, such as Colace Capsules. Since the active ingredient is docusate sodium, Colace Capsules help avoid the painful straining associated with occasional constipation.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. Colace Capsules is the leading product recommended by doctors and pharmacists to provide reliable relief. Of course, if you are pregnant or nursing, you should consult with your doctor before use, and remember to tell your doctor about any other medications you are taking.
Bailout Talks Reopen Wounds In One Greek Village
Europe is still a continent that looks over its shoulder at a long and sometimes dark past. That extends even to the protracted Greek bailout negotiations, where Germany's dominant role has scratched at some historical wounds. Just Choose PTMS Plastic Mould Is Your Best Choice!
Germany occupied Greece during World War II, committing atrocities that some older Greeks can't forget. This history defines the pretty village of Distomo in central Greece, where Nazi soldiers killed 218 men, women and children in June 1944.
Panagiotis Sfountouris, 74, says he'll never forget that day. He was just 6 years old when he and his younger sister escaped death by hiding in a relative's basement. When they returned home, they found their parents shot dead and their 2-year-old brother gutted by a bayonet.
"I ran to the balcony and screamed, 'They've killed my father and my mother and our little Niko!' " Sfountouris recalls. "Nothing moved in Distomo, nothing at all. We saw dead people everywhere. When it started getting dark, we got scared all over again. My uncle came to get us, and we spent the night hiding in the mountains.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists."
Sfountouris still cries when he talks about the family he lost. He now runs a gas station in Distomo and says he has to buy nearly all of his products from Germany. Many goods sold in Greece are imported from Germany, a fellow European Union country.
Sfountouris says he will never trust the Germans. "They're not going to change," he says. "I mean, can someone put on different clothes and pretend to be someone else? I just hope these people don't end up being worse."
Until the debt crisis, Greece and Germany actually had a happy relationship. Greeks studied and worked in Germany, and Germans spent summer holidays in Greece. But as austerity crippled the Greek economy and Germans wanted more belt-tightening, Greeks felt besieged.
Many residents of Distomo are open to Europe and even to Germany. But the town is mainly known for the Nazi massacre - it even took Germany to court over war reparations, though it lost. There's a monument for the dead atop its highest hill, and residents recently remodeled an old elementary school to house a new museum.
Nikos Bouras, who works at the town hall, often unlocks the museum for visitors. It's chilly inside because Distomo doesn't have money for heat, and voices echo. Near the entrance, there's a portrait of a distraught young woman whose family was murdered.
"It's a characteristic image of the time," Bouras says.Distributes and manufactures RUBBER SHEET, "This picture was called the Distomo Mother. Her name was Maria Pandiska. This picture has gone all over the world and is part of our activism here."
Bouras, who is 37, is aware that this history molds his opinions of Germans today. He says he's concerned that the European Union, led by Germany, is robbing Greeks of their sovereignty in exchange for billions in bailout loans.
This has caused him to lose faith in the euro, the EU's common currency.
"I personally don't think it would be such a disaster to go back to the drachma," he says. "I'm sure it's better than abdicating our national dignity."
Austerity measures in exchange for bailout loans have hit Distomo residents - like all Greeks - hard. Bouras' salary has been cut, and so has Sfountouris' pension.
With youth unemployment at almost 50 percent in Greece, the town's youngest residents are concerned, too.
Vassilis Pandiskas and Andreas Kallermenos,All RUBBER MATS is comprised of all types of mats, both 17, say they worry about their future in Greece because of the debt crisis and the harsh austerity measures that have stalled the economy.
"We won't have jobs, I'm sure of it," Kallermenos says.
They think Europeans look down on Greeks but that Greece nevertheless belongs in the European Union.
"The Europeans are difficult, but I don't accept that we don't belong with them," says Pandiskas,Listing of Taiwan & China Mold Maker manufacturer & suppliers. whose great aunt Maria is the woman pictured in the Distomo Mother. He says he grew up hearing gruesome stories of the Distomo massacre but that he doesn't hate Germans.
Ioanna Gamvrilli, who is also 17, wants to be a civil engineer though she fears she'll never get a job.
But she doesn't blame Germany for Greece's debt crisis. She says Greek politicians got the country into debt. She likes the Germans she has met,Online fine art gallery of quality original landscape oil paintings, including a good friend named Sophie whom she met when a church group from Nuremberg came to honor the dead of Distomo a few years ago.
Germany occupied Greece during World War II, committing atrocities that some older Greeks can't forget. This history defines the pretty village of Distomo in central Greece, where Nazi soldiers killed 218 men, women and children in June 1944.
Panagiotis Sfountouris, 74, says he'll never forget that day. He was just 6 years old when he and his younger sister escaped death by hiding in a relative's basement. When they returned home, they found their parents shot dead and their 2-year-old brother gutted by a bayonet.
"I ran to the balcony and screamed, 'They've killed my father and my mother and our little Niko!' " Sfountouris recalls. "Nothing moved in Distomo, nothing at all. We saw dead people everywhere. When it started getting dark, we got scared all over again. My uncle came to get us, and we spent the night hiding in the mountains.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists."
Sfountouris still cries when he talks about the family he lost. He now runs a gas station in Distomo and says he has to buy nearly all of his products from Germany. Many goods sold in Greece are imported from Germany, a fellow European Union country.
Sfountouris says he will never trust the Germans. "They're not going to change," he says. "I mean, can someone put on different clothes and pretend to be someone else? I just hope these people don't end up being worse."
Until the debt crisis, Greece and Germany actually had a happy relationship. Greeks studied and worked in Germany, and Germans spent summer holidays in Greece. But as austerity crippled the Greek economy and Germans wanted more belt-tightening, Greeks felt besieged.
Many residents of Distomo are open to Europe and even to Germany. But the town is mainly known for the Nazi massacre - it even took Germany to court over war reparations, though it lost. There's a monument for the dead atop its highest hill, and residents recently remodeled an old elementary school to house a new museum.
Nikos Bouras, who works at the town hall, often unlocks the museum for visitors. It's chilly inside because Distomo doesn't have money for heat, and voices echo. Near the entrance, there's a portrait of a distraught young woman whose family was murdered.
"It's a characteristic image of the time," Bouras says.Distributes and manufactures RUBBER SHEET, "This picture was called the Distomo Mother. Her name was Maria Pandiska. This picture has gone all over the world and is part of our activism here."
Bouras, who is 37, is aware that this history molds his opinions of Germans today. He says he's concerned that the European Union, led by Germany, is robbing Greeks of their sovereignty in exchange for billions in bailout loans.
This has caused him to lose faith in the euro, the EU's common currency.
"I personally don't think it would be such a disaster to go back to the drachma," he says. "I'm sure it's better than abdicating our national dignity."
Austerity measures in exchange for bailout loans have hit Distomo residents - like all Greeks - hard. Bouras' salary has been cut, and so has Sfountouris' pension.
With youth unemployment at almost 50 percent in Greece, the town's youngest residents are concerned, too.
Vassilis Pandiskas and Andreas Kallermenos,All RUBBER MATS is comprised of all types of mats, both 17, say they worry about their future in Greece because of the debt crisis and the harsh austerity measures that have stalled the economy.
"We won't have jobs, I'm sure of it," Kallermenos says.
They think Europeans look down on Greeks but that Greece nevertheless belongs in the European Union.
"The Europeans are difficult, but I don't accept that we don't belong with them," says Pandiskas,Listing of Taiwan & China Mold Maker manufacturer & suppliers. whose great aunt Maria is the woman pictured in the Distomo Mother. He says he grew up hearing gruesome stories of the Distomo massacre but that he doesn't hate Germans.
Ioanna Gamvrilli, who is also 17, wants to be a civil engineer though she fears she'll never get a job.
But she doesn't blame Germany for Greece's debt crisis. She says Greek politicians got the country into debt. She likes the Germans she has met,Online fine art gallery of quality original landscape oil paintings, including a good friend named Sophie whom she met when a church group from Nuremberg came to honor the dead of Distomo a few years ago.
Apple slaps mega-solar panel field on new ENORMO data centre
Apple has dropped a few more details about its huge new data centre in Maiden, North Carolina in an update to its environmental policy published yesterday.
A big feature of the new billion-dollar data centre – needed to keep Siri chatting back, and to let new OS Mountain Lion sync games in real time between iPhones and Macs – is a 100-acre solar panel field,Online fine art gallery of quality original landscape oil paintings, which, along with a biofuel burner, Apple says will provide a "high percentage" of the data centre's energy needs.
But the energy from the solar field and from a bio-gas powered fuel cell could be as little as 9 per cent of the total that the data centre slurps - that is if Greenpeace's estimate of the energy needed is accurate. The whale-huggers predict that the massive data centre will require 100 megawatts to run at full capacity. Just Choose PTMS Injection Mold Is Your Best Choice!
More conservative estimates would put the Maiden centre's power draw a little lower.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. A $210m Facebook data centre in Prineville, Oregon draws a reputed 28 megawatts off the local grid. But though Apple's Maiden data centre is 500,000ft2 and has a $1bn price tag, quadrupling the cost won't necessarily quadruple the power draw.
The Maiden centre is one of the biggest data centres ever built but is more likely to be in the range of existing big data centres than completely in a league of its own: the US government runs several of the world's biggest data centres and these typically draw about 60 megawatts of power. We'd estimate that the power consumption of Maiden will be around the 50 to 60 megawatt mark.
We've obviously asked Apple to tell us how much energy the centre will use in a year,Listing of Taiwan & China Mold Maker manufacturer & suppliers. but in the absence of their response, estimates are all we have to go on.
Apple states that the solar panel field will produce 42 million kWh of energy annually and that the biogas fuel cell plant will produce 40 million kWh annually. Together they will produce 82 million kWh a year or simply 9,360 kWh on average an hour - a rate of 9,360 kilowatts or 9.36 megawatts between the two of them, averaged out over the year.All RUBBER MATS is comprised of all types of mats,
If the whale-huggers are right and the data centre will draw up power at a rate of 100 megawatts, that means that renewables will provide only 9.36 per cent of the power needed and that over 90 per cent of the centre's power needs will have to be drawn from North Carolina's power grid.
If our more conservative guess is right and the centre is sucking up energy at a rate of 60 megawatts,Distributes and manufactures RUBBER SHEET, that would mean that Apple's renewables installations would supply 15 per cent of the centre's power, with the rest coming from the grid. North Carolina is a popular location for data centres because grid electricity there is cheap: both Google and Facebook have sited big centres there.
Whether 9-15 per cent qualifies as a "high percentage" of renewable power is a matter of perspective.
The update of Apple's environmental policy also includes some other tidbits about Apple's right-on energy policy: for example applying reflective paint to the roofs and windows of their buildings, making disposable tableware in the cafeteria compostable and a shared bike programme for Cupertino employees. Oh yes, and they say their employees save energy - and presumably money - by using Apple computers.
Apple also says that its facilities - its offices, retail stores and data centres - only account for 2 per cent of its greenhouse gas emissions; the bulk - 60 per cent - comes from manufacturing its devices.
A big feature of the new billion-dollar data centre – needed to keep Siri chatting back, and to let new OS Mountain Lion sync games in real time between iPhones and Macs – is a 100-acre solar panel field,Online fine art gallery of quality original landscape oil paintings, which, along with a biofuel burner, Apple says will provide a "high percentage" of the data centre's energy needs.
But the energy from the solar field and from a bio-gas powered fuel cell could be as little as 9 per cent of the total that the data centre slurps - that is if Greenpeace's estimate of the energy needed is accurate. The whale-huggers predict that the massive data centre will require 100 megawatts to run at full capacity. Just Choose PTMS Injection Mold Is Your Best Choice!
More conservative estimates would put the Maiden centre's power draw a little lower.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. A $210m Facebook data centre in Prineville, Oregon draws a reputed 28 megawatts off the local grid. But though Apple's Maiden data centre is 500,000ft2 and has a $1bn price tag, quadrupling the cost won't necessarily quadruple the power draw.
The Maiden centre is one of the biggest data centres ever built but is more likely to be in the range of existing big data centres than completely in a league of its own: the US government runs several of the world's biggest data centres and these typically draw about 60 megawatts of power. We'd estimate that the power consumption of Maiden will be around the 50 to 60 megawatt mark.
We've obviously asked Apple to tell us how much energy the centre will use in a year,Listing of Taiwan & China Mold Maker manufacturer & suppliers. but in the absence of their response, estimates are all we have to go on.
Apple states that the solar panel field will produce 42 million kWh of energy annually and that the biogas fuel cell plant will produce 40 million kWh annually. Together they will produce 82 million kWh a year or simply 9,360 kWh on average an hour - a rate of 9,360 kilowatts or 9.36 megawatts between the two of them, averaged out over the year.All RUBBER MATS is comprised of all types of mats,
If the whale-huggers are right and the data centre will draw up power at a rate of 100 megawatts, that means that renewables will provide only 9.36 per cent of the power needed and that over 90 per cent of the centre's power needs will have to be drawn from North Carolina's power grid.
If our more conservative guess is right and the centre is sucking up energy at a rate of 60 megawatts,Distributes and manufactures RUBBER SHEET, that would mean that Apple's renewables installations would supply 15 per cent of the centre's power, with the rest coming from the grid. North Carolina is a popular location for data centres because grid electricity there is cheap: both Google and Facebook have sited big centres there.
Whether 9-15 per cent qualifies as a "high percentage" of renewable power is a matter of perspective.
The update of Apple's environmental policy also includes some other tidbits about Apple's right-on energy policy: for example applying reflective paint to the roofs and windows of their buildings, making disposable tableware in the cafeteria compostable and a shared bike programme for Cupertino employees. Oh yes, and they say their employees save energy - and presumably money - by using Apple computers.
Apple also says that its facilities - its offices, retail stores and data centres - only account for 2 per cent of its greenhouse gas emissions; the bulk - 60 per cent - comes from manufacturing its devices.
It’s OK to have an unexpressed thought
According to my personal dictionary, the term “inside thoughts” generally refers to any mental or intellectual opinion, created by the human brain. This subjective belief is guaranteed to offend another human being or make said offender appear ridiculous.
Thus, such thought is kept “inside,” meaning the thinker keeps his or her mouth shut to avoid serious repercussions. Just Choose PTMS plastic injection mould Is Your Best Choice!
My first experiences with inside thoughts began at a fifth-grade slumber party. The usual events occurred that evening: pizza, movies and a lengthy discussion about boys. But somewhere between 1-3 a.m., our adolescent minds decided to do something a bit different.
Somebody suggested, “Let’s go around the circle and say what we don’t like about one another.”
I can’t remember who came up with the concept, but we all played along. As you can imagine, it didn’t end well. It didn’t take long for tears to flow and tempers to flare. If you tell someone straight to her face that she is a big flirt (a comment that targeted me) or she is bossy (something I directed at a friend), things are bound to get ugly.
Perhaps we were bored, or maybe we were just mean. Regardless, we should have had “inside thoughts” that evening, especially since we all had to sleep in the same room.
The following situations are examples of what I deem inside thoughts.
You approach a female stranger at a grocery store.Monz Werkzeugbau und Formenbau. She seems to be glowing and at first glance she appears pregnant. Her round belly and personal items in her shopping cart seem like a giveaway for a, “Congratulations, when are you due?” comment.Online fine art gallery of quality original landscape oil paintings, But don’t be fooled. Unless you know this person and she has told you that a baby is coming, do not — I repeat,We are professional Plastic mould, do not — congratulate her. The glow could very well be sweat from a recent workout where she was trying to get rid of the extra pounds from her baby that is now 2 years old.
You’ve had an incredibly bad day and want to use the world of social media as a sounding board for your misfortune. Please, before you type, tweet or text the world, ask yourself if it is an inside thought. I promise you there will be repercussions if you say, “My boss is a scumbag, my hemorrhoids are acting up and my boyfriend cheated on me again. Time for me to go to bed.” That, my friend, should have been an inside thought.
Gossip. Period. All gossip should be inside thoughts. It’s human nature to have bad thoughts about people. That’s just expected. But the minute you open your mouth and turn those inside thoughts into gossip, all bets are off.
I’m working on the last one. To be honest, I think it’s very hard for women not to gossip.
In my 30 years, I have learned to finesse my own inside thoughts. Although I’m certain I have ignored my own definition from time to time,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. I am happy to tell you that I am a work in progress.The Transaction Group offers the best high risk merchant account services, Each time I open my mouth or type something into a social media outlet, I ask myself if I am ready to face the repercussions of my actions.
If I’m not, then I keep my mouth shut. It’s much easier to have an inside thought than to deal with the consequence.
I remember comments at the fifth-grade slumber party. Some were refreshed in my mind after reading my diary, but others have always stuck. Words can be wonderful, but words also can be hurtful.
Thus, such thought is kept “inside,” meaning the thinker keeps his or her mouth shut to avoid serious repercussions. Just Choose PTMS plastic injection mould Is Your Best Choice!
My first experiences with inside thoughts began at a fifth-grade slumber party. The usual events occurred that evening: pizza, movies and a lengthy discussion about boys. But somewhere between 1-3 a.m., our adolescent minds decided to do something a bit different.
Somebody suggested, “Let’s go around the circle and say what we don’t like about one another.”
I can’t remember who came up with the concept, but we all played along. As you can imagine, it didn’t end well. It didn’t take long for tears to flow and tempers to flare. If you tell someone straight to her face that she is a big flirt (a comment that targeted me) or she is bossy (something I directed at a friend), things are bound to get ugly.
Perhaps we were bored, or maybe we were just mean. Regardless, we should have had “inside thoughts” that evening, especially since we all had to sleep in the same room.
The following situations are examples of what I deem inside thoughts.
You approach a female stranger at a grocery store.Monz Werkzeugbau und Formenbau. She seems to be glowing and at first glance she appears pregnant. Her round belly and personal items in her shopping cart seem like a giveaway for a, “Congratulations, when are you due?” comment.Online fine art gallery of quality original landscape oil paintings, But don’t be fooled. Unless you know this person and she has told you that a baby is coming, do not — I repeat,We are professional Plastic mould, do not — congratulate her. The glow could very well be sweat from a recent workout where she was trying to get rid of the extra pounds from her baby that is now 2 years old.
You’ve had an incredibly bad day and want to use the world of social media as a sounding board for your misfortune. Please, before you type, tweet or text the world, ask yourself if it is an inside thought. I promise you there will be repercussions if you say, “My boss is a scumbag, my hemorrhoids are acting up and my boyfriend cheated on me again. Time for me to go to bed.” That, my friend, should have been an inside thought.
Gossip. Period. All gossip should be inside thoughts. It’s human nature to have bad thoughts about people. That’s just expected. But the minute you open your mouth and turn those inside thoughts into gossip, all bets are off.
I’m working on the last one. To be honest, I think it’s very hard for women not to gossip.
In my 30 years, I have learned to finesse my own inside thoughts. Although I’m certain I have ignored my own definition from time to time,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. I am happy to tell you that I am a work in progress.The Transaction Group offers the best high risk merchant account services, Each time I open my mouth or type something into a social media outlet, I ask myself if I am ready to face the repercussions of my actions.
If I’m not, then I keep my mouth shut. It’s much easier to have an inside thought than to deal with the consequence.
I remember comments at the fifth-grade slumber party. Some were refreshed in my mind after reading my diary, but others have always stuck. Words can be wonderful, but words also can be hurtful.
2012年2月19日 星期日
Contrasting styles happily converge at Elizabeth Moss
Deborah Randall rather backed into painting Maine landscapes. She had been making content-oriented contemporary paintings with wildly varied subjects, but her ability to paint was strong, and a trip to Italy forced her not only to look at the landscape but see it in terms of painting.
After the trip, Randall continued working in both modes, and the landscapes became not only something she could do but a way of working that put the paint first rather than external ideas she would loan to herself now and again.
This transformation in approach is something that often marks the transition to being a mature artist. At first, it's the struggle with the ideas that drives the artist to paint. Then the artist achieves a sort of fluency and begins thinking in the terms of the art so the ideas don't require any sort of literal translation.Silicone Mold Making Rubber, In other words, the work becomes less about sense than sensibility.
"On the Horizon" at Elizabeth Moss Galleries in Falmouth features Randall's moody landscapes with aggressive skies. She has made the rhythm and energy of her brushstroke into the most obvious and powerful component of her paintings.
This leads to many poignant effects, including a clear sense of urgency from her staccato strokes. Sometimes this can come across as hurried, but when it's handled well, it exudes deftly excited energy. The quickness of the execution validates the viewers' experience of the ephemeral unity of the painting: The image feels like a moment in a certain place rather than something broader, more complex or fractured.
"Sunset Over Little River" might be Randall at her best. The almost-square 4-foot canvas is about two-thirds sky over a bend in the river. The palette is 19th-century French with its sap greens, creamy yellows and rich, earthy reds. I particularly like its substantial cloud action. While it's that familiar puff-dotted August sky that makes so many of us fall in love with Maine, Randall's palette combines with her almost frantically muscular rhythms to make an unusually bold -- even masculine -- painting.
It might sound strange to talk about clouds of purple, red, brown and black,All RUBBER MATS is comprised of all types of mats, but the scheme works perfectly when backed with Naples yellow, soft pinks and light sky azures.
Randall's knife work is strong, and she uses it particularly well in the foreground bands of landscape. She struggles, however, when shapes are allowed to take formal supremacy over the rhythms of the strokes.
In her "Marsh Light," for example, an overly simple and somewhat awkward curve of brown marking the edge of the water is too unrelenting in palette and touch, and so unfortunately winds up dominating the composition.Dimensional Mailing magic cube for Promotional Advertising, Fortunately, this tension between abstract forms and rhythmic structure is the exception rather than the rule in "On the Horizon."
With the current ideas about branding,MDC Mould specialized of Injection moulds, style and recognizability, we don't spend enough time considering the range of modes of artists like Randall. Yet it's rather standard fare for artists like Henry Kallem (1912-85), whose work occupies Moss' center gallery.
Kallem was a noteworthy American modernist deeply tied to Monhegan and New York. Due to the time he worked, however, we aren't surprised to see still lifes, landscapes, abstractions, interiors, portraits and so many other modes.
Such a range for a contemporary artist in a single show might strike many viewers as flighty or unfocused. Yet for the artists of Kallem's era, the ability to shift gears was evidence of ability, awareness, worldliness and erudition.
While my favorite Kallem piece in the show is a forest of thick vertical-lined tree trunks that reminds me of Wilfredo Lam, I spent the most time parsing and comparing a pair of still lifes. One is light and airy, like a Monet vase of flowers painted by Chagall, what with its primary patches of background color and the joyously light touch in the vase that is rendered more than sufficiently with just a few outline strokes.
The other is a tight,Overview description of rapid Tooling processes. heavy and flat cubist still life of bottles on a table. With echoes of Hoffman, Leger and Purism, it presents an impressive density despite appearing at first as dogmatically stylized.
After the trip, Randall continued working in both modes, and the landscapes became not only something she could do but a way of working that put the paint first rather than external ideas she would loan to herself now and again.
This transformation in approach is something that often marks the transition to being a mature artist. At first, it's the struggle with the ideas that drives the artist to paint. Then the artist achieves a sort of fluency and begins thinking in the terms of the art so the ideas don't require any sort of literal translation.Silicone Mold Making Rubber, In other words, the work becomes less about sense than sensibility.
"On the Horizon" at Elizabeth Moss Galleries in Falmouth features Randall's moody landscapes with aggressive skies. She has made the rhythm and energy of her brushstroke into the most obvious and powerful component of her paintings.
This leads to many poignant effects, including a clear sense of urgency from her staccato strokes. Sometimes this can come across as hurried, but when it's handled well, it exudes deftly excited energy. The quickness of the execution validates the viewers' experience of the ephemeral unity of the painting: The image feels like a moment in a certain place rather than something broader, more complex or fractured.
"Sunset Over Little River" might be Randall at her best. The almost-square 4-foot canvas is about two-thirds sky over a bend in the river. The palette is 19th-century French with its sap greens, creamy yellows and rich, earthy reds. I particularly like its substantial cloud action. While it's that familiar puff-dotted August sky that makes so many of us fall in love with Maine, Randall's palette combines with her almost frantically muscular rhythms to make an unusually bold -- even masculine -- painting.
It might sound strange to talk about clouds of purple, red, brown and black,All RUBBER MATS is comprised of all types of mats, but the scheme works perfectly when backed with Naples yellow, soft pinks and light sky azures.
Randall's knife work is strong, and she uses it particularly well in the foreground bands of landscape. She struggles, however, when shapes are allowed to take formal supremacy over the rhythms of the strokes.
In her "Marsh Light," for example, an overly simple and somewhat awkward curve of brown marking the edge of the water is too unrelenting in palette and touch, and so unfortunately winds up dominating the composition.Dimensional Mailing magic cube for Promotional Advertising, Fortunately, this tension between abstract forms and rhythmic structure is the exception rather than the rule in "On the Horizon."
With the current ideas about branding,MDC Mould specialized of Injection moulds, style and recognizability, we don't spend enough time considering the range of modes of artists like Randall. Yet it's rather standard fare for artists like Henry Kallem (1912-85), whose work occupies Moss' center gallery.
Kallem was a noteworthy American modernist deeply tied to Monhegan and New York. Due to the time he worked, however, we aren't surprised to see still lifes, landscapes, abstractions, interiors, portraits and so many other modes.
Such a range for a contemporary artist in a single show might strike many viewers as flighty or unfocused. Yet for the artists of Kallem's era, the ability to shift gears was evidence of ability, awareness, worldliness and erudition.
While my favorite Kallem piece in the show is a forest of thick vertical-lined tree trunks that reminds me of Wilfredo Lam, I spent the most time parsing and comparing a pair of still lifes. One is light and airy, like a Monet vase of flowers painted by Chagall, what with its primary patches of background color and the joyously light touch in the vase that is rendered more than sufficiently with just a few outline strokes.
The other is a tight,Overview description of rapid Tooling processes. heavy and flat cubist still life of bottles on a table. With echoes of Hoffman, Leger and Purism, it presents an impressive density despite appearing at first as dogmatically stylized.
Funny business of a football club
WHEN Lawrence Marlborough announced, in November 1988,Silicone Mold Making Rubber, he had sold his controlling stake in Rangers Football Club for 6 million, a plaintive cry went round my newsroom. “Who is this guy David Murray? Anyone ever heard of him?” I was the only journalist around that day who had.
A few years earlier I had been sent to do an in-depth interview with Murray at his then-headquarters in an old West Lothian mansion. He had won the Scottish Business Achievement Award and the trust that organised this annual ceremony liked to include a major profile of the previous winner in the following year’s programme. Murray’s was a colourful, poignant and inspiring story. He had been sent to board at Fettes by his father,MDC Mould specialized of Injection moulds, an Ayrshire coal merchant but had had to leave in his early teens when his father’s heavy gambling brought his business to its knees. David talked about his own early entrepreneurial instincts, selling anything he could create demand for to his fellow pupils, then starting his own metals trading business in his early twenties. He also talked about the day, aged 23, when, coming home from playing rugby in his Lotus sports car, he hit a tree and lost both his legs.
Our first encounter was lively and engaging. I stayed in touch as his business interests developed into areas like property and sub-assembly for the electronics industry. I knew he had tried and failed to buy the football club he supported as a boy, Ayr United. But when the news came through that he was buying Rangers, I was as astonished as everyone else.
Some three years on, with the early 1990s recession beginning to bite, my editor called me into his office. “I’ve heard there are serious problems with David Murray’s property interests. Could you check it out?” he suggested. I talked to my contacts and checked out the relevant company accounts.Overview description of rapid Tooling processes. It rapidly became clear there were problems. They were big ones.
The auditors had qualified their opinion on some of the accounts. Drilling into the numbers it was easy to see that these businesses, covering everything from a big spread of development land around Edinburgh airport to a landmark building in Charlotte Square, were only still able to trade because Bank of Scotland had pumped very big loans and additional equity into the businesses.
And this was happening at the same time when a recently-acquired Rangers’ overdraft had tripled in the space of a year. All in all, my editor’s whispers had substance. This was a story of considerable significance for both the bank and for the credibility of David Murray’s growing business empire.
When the stories on what I had found appeared, he went ballistic. There were demands I be sacked. I have never spoken to David Murray from that day to this. I once found myself in his company, tried to broker a peace and was right royally snubbed for my pains.
I’m telling you all this because it illustrates how the events of recent days – plunging one half of the Old Firm into ignominious administration and threatening its very existence in its present form – have been incubating for a very long time indeed. Craig Whyte will have to account for his stewardship of Rangers since last May. What happened to the Ticketus millions? Why, since last May, 9m in taxes wasn’t remitted to HMRC but used to pay for club operating costs instead?
However the idea that the way to run a sustainable football club is to pay whatever it takes to buy success on the field, leverage the business as high as the highest tier in the stands and trust that the bank will still be standing right behind you if it all goes wrong was already there, in Rangers’ case, the day David Murray did that deal nearly a quarter of a century ago.
This whole saga also exposes some of the malign forces and the crony relationships that led us to the great banking crash of 2008 and the protracted slump that has followed.
In the boom years we had bankers who thought they were entrepreneurs. And entrepreneurs who thought the special relationships they built up with individual bankers would see them through the ups and downs of the economic cycle, no matter how much they owed.
David Murray revelled in being one of the chosen highly-leveraged few. At the beginning of the 1990s, when his property interests already had 40m in overdraft facilities and a further 11.5m in equity from Bank of Scotland to keep them afloat, he explained away his “exceptional” treatment as being down to “sixteen years of never letting the bank down”.
But that bank, in essence, brought itself down because of its vast exposure to commercial property lending in businesses like Murray’s,All RUBBER MATS is comprised of all types of mats, when the tide turned. Bank of Scotland has paid a very heavy price. Today it is little more than a brand name within the wider Lloyds Banking Group, itself still 43 per cent state-owned. Once that happened David Murray must have known the party was finally over. He too will have to account for why he saw fit to sell Rangers on, in the way he did, to Craig Whyte.
Scottish politicians, clamouring to get a early settlement between HMRC and the administrators so that another part of the institutional “fabric of the Scottish nation” doesn’t go the way of Bank of Scotland should reflect a little more on some of the other lessons to be learned from this debacle.
A leading Scottish bank, a leading Scottish entrepreneur and a leading Scottish football club have all, in their own ways,Dimensional Mailing magic cube for Promotional Advertising, been consumed by this crisis. What does that say about how we do business in Scotland? What are the shortcomings? What should we be doing differently?
Motherwell FC is another Scottish Premier League club that has tasted administration in recent times. When Motherwell’s owner John Boyle decide to stand down he gifted control of his shares to the Motherwell board.
A few years earlier I had been sent to do an in-depth interview with Murray at his then-headquarters in an old West Lothian mansion. He had won the Scottish Business Achievement Award and the trust that organised this annual ceremony liked to include a major profile of the previous winner in the following year’s programme. Murray’s was a colourful, poignant and inspiring story. He had been sent to board at Fettes by his father,MDC Mould specialized of Injection moulds, an Ayrshire coal merchant but had had to leave in his early teens when his father’s heavy gambling brought his business to its knees. David talked about his own early entrepreneurial instincts, selling anything he could create demand for to his fellow pupils, then starting his own metals trading business in his early twenties. He also talked about the day, aged 23, when, coming home from playing rugby in his Lotus sports car, he hit a tree and lost both his legs.
Our first encounter was lively and engaging. I stayed in touch as his business interests developed into areas like property and sub-assembly for the electronics industry. I knew he had tried and failed to buy the football club he supported as a boy, Ayr United. But when the news came through that he was buying Rangers, I was as astonished as everyone else.
Some three years on, with the early 1990s recession beginning to bite, my editor called me into his office. “I’ve heard there are serious problems with David Murray’s property interests. Could you check it out?” he suggested. I talked to my contacts and checked out the relevant company accounts.Overview description of rapid Tooling processes. It rapidly became clear there were problems. They were big ones.
The auditors had qualified their opinion on some of the accounts. Drilling into the numbers it was easy to see that these businesses, covering everything from a big spread of development land around Edinburgh airport to a landmark building in Charlotte Square, were only still able to trade because Bank of Scotland had pumped very big loans and additional equity into the businesses.
And this was happening at the same time when a recently-acquired Rangers’ overdraft had tripled in the space of a year. All in all, my editor’s whispers had substance. This was a story of considerable significance for both the bank and for the credibility of David Murray’s growing business empire.
When the stories on what I had found appeared, he went ballistic. There were demands I be sacked. I have never spoken to David Murray from that day to this. I once found myself in his company, tried to broker a peace and was right royally snubbed for my pains.
I’m telling you all this because it illustrates how the events of recent days – plunging one half of the Old Firm into ignominious administration and threatening its very existence in its present form – have been incubating for a very long time indeed. Craig Whyte will have to account for his stewardship of Rangers since last May. What happened to the Ticketus millions? Why, since last May, 9m in taxes wasn’t remitted to HMRC but used to pay for club operating costs instead?
However the idea that the way to run a sustainable football club is to pay whatever it takes to buy success on the field, leverage the business as high as the highest tier in the stands and trust that the bank will still be standing right behind you if it all goes wrong was already there, in Rangers’ case, the day David Murray did that deal nearly a quarter of a century ago.
This whole saga also exposes some of the malign forces and the crony relationships that led us to the great banking crash of 2008 and the protracted slump that has followed.
In the boom years we had bankers who thought they were entrepreneurs. And entrepreneurs who thought the special relationships they built up with individual bankers would see them through the ups and downs of the economic cycle, no matter how much they owed.
David Murray revelled in being one of the chosen highly-leveraged few. At the beginning of the 1990s, when his property interests already had 40m in overdraft facilities and a further 11.5m in equity from Bank of Scotland to keep them afloat, he explained away his “exceptional” treatment as being down to “sixteen years of never letting the bank down”.
But that bank, in essence, brought itself down because of its vast exposure to commercial property lending in businesses like Murray’s,All RUBBER MATS is comprised of all types of mats, when the tide turned. Bank of Scotland has paid a very heavy price. Today it is little more than a brand name within the wider Lloyds Banking Group, itself still 43 per cent state-owned. Once that happened David Murray must have known the party was finally over. He too will have to account for why he saw fit to sell Rangers on, in the way he did, to Craig Whyte.
Scottish politicians, clamouring to get a early settlement between HMRC and the administrators so that another part of the institutional “fabric of the Scottish nation” doesn’t go the way of Bank of Scotland should reflect a little more on some of the other lessons to be learned from this debacle.
A leading Scottish bank, a leading Scottish entrepreneur and a leading Scottish football club have all, in their own ways,Dimensional Mailing magic cube for Promotional Advertising, been consumed by this crisis. What does that say about how we do business in Scotland? What are the shortcomings? What should we be doing differently?
Motherwell FC is another Scottish Premier League club that has tasted administration in recent times. When Motherwell’s owner John Boyle decide to stand down he gifted control of his shares to the Motherwell board.
He is the Hope and Change Candidate of 2012
Who is the inspirational leader, the “hope and change” of the 2012 elections? That would be Ron Paul.
And if Republicans hope to win in November, they must include the libertarian congressman on their eventual presidential ticket.
Take a mental field trip with me, and let me walk you through this.
Even the fiercest critics of President Barack Obama have to honestly ask themselves one simple question: Do you really think, deep down in your heart, Obama will lose in November?
At this stage in the presidential race, it’s hard for any level-headed individual to honestly say yes. Just Choose PTMS plastic injection mold Is Your Best Choice!
Obama is crushing the game.
And if your gut isn’t giving you this answer, then try and argue the cold hard data points.
A recent CNN poll shows that Obama is beating all of his possible Republican rivals in hypothetical GOP match-ups. Obama leads Mitt Romney 51% to 46%, tops Rick Santorum 52% to 45%, beats Paul, 52% to 45%, and crushes Newt Gingrich (why is he still in the race, btw?) 55% to 42%.
A Fox News poll of key battleground states — Colorado, Florida, Iowa, Nevada, New Mexico, North Carolina, Pennsylvania, Ohio, Virginia and Wisconsin — shows the same: Obama leads Romney, 47% to 39%, tops Santorum, 48% to 38%, beats Paul 48% to 37% and crushes Gingrich, 52% to 32% (L Republicans).
Obama raised $11.8 million for his campaign in January,MDC Mould specialized of Injection moulds, according to FEC filings released Friday. This total is less than a third of the $36.8 million he raised during the same month four years ago. He remains the top fundraiser in the presidential race.
What’s better for Obama is the complete political disunity in the Republican Party. The race has boiled down to Romney against any-flavor-of-the-month of anti-Romney. The GOP primary is turning into a meat grinder, blackening the eyes of all candidates.Dimensional Mailing magic cube for Promotional Advertising, And there’s no end in sight. The Wall Street Journal argues that the GOP primary will run into May or June (George W. Bush in 2000 and John McCain in 2008 had won their respective primary battles by the middle of March), making this the most “grueling” GOP race since the Reagan-Ford marathon went all the way to the convention in 1976.
Disunity, unfortunately, is the one intangible piece in this puzzle. If Republicans were more unified in their battle to unseat one of the most unpopular presidents in modern history, then they could have a true fighting chance. But for a party that is facing an identity crisis — filled with the juxtaposition of evangelical conservatives, Tea Partiers, libertarians, neocons, and moderates —“unity” in itself will be a “grueling” process.
But unity will be the only way forward for Republicans, and if the GOP hopes to take back the White House, then they should realize that the answer to all of their woes lies in uniting Ron Paul and his supporters with the wider party.
Paul is the biggest chance the GOP has to win the presidency in 2012. His brand of conservatism is progressive enough to draw in key voting blocs and his immense grass roots base is fervent enough to challenge the “hope and change-ers” that propelled Obama to the presidency in 2008. Unfortunately, though, Paul will never be the Republican presidential nominee. He’s a fringe candidate. As such, the eventual GOP candidate must pick Paul as their running mate.
Paul would draw in massively critical demographics. He is the quintessential Tea Partier (check). Young people love him and are hugely inspired by him (check).Overview description of rapid Tooling processes. Progressives and liberals can easily jump on the Paul bandwagon (um, super check). Military folks overwhelmingly love him (check).
The only comparable Republican who could possibly fit this mold would be Tea Party Senator Marco Rubio (R-Fla.), but he has neither the grassroots followers nor political résumé to be a viable threat on the GOP ticket.
Continue on this mental field trip with me.
Paired with a more mainstream conservative like Mitt Romney, the GOP ticket would truly be able to call itself “electable.” Imagine the one-two punch a Romney-Paul ticket could provide: Romney’s money machine juggernaut could compete with Obama and the Democrats’ Super PACS, while Paul would rain down a storm of philosophical and policy counterpoints that would unhinge Obama’s own policy platform.
In an age of austerity and military pull-back, Paul’s ideals would trump Obama in the eyes of the average voter. In this Super PAC election cycle, Romney’s money would drown the Democrats.
There’s still the unity question. It seems any libertarian or Paulite doesn’t comprehend that Paul is running, in fact, as a Republican — under the same banner as other notable politicians including George W.All RUBBER MATS is comprised of all types of mats, Bush,Silicone Mold Making Rubber, Sarah Palin, and Ronald Reagan, all of which I would contend libertarians don’t relate to. Libertarians seem to hate being grouped in the “Republican” category, and would be hard-pressed to buy into the Grand Old Party’s wider ideals.
And, besides, Paul in a fringe candidate. Regular conservatives think Paul is stirring a crock of … well you know. A foreign policy built on diplomacy rather than the military ? Are you kidding me? How un-Republican.
Then there's that whole racism thing. That'll sting.
Still, I think there’s something there, something that the Republicans should consider tapping into if they hope to have a realistic chance at the presidency.
Paul could prove to be the iconic image of the 2012 election, especially in a time when many voters are looking for such a political savior.
And if Republicans hope to win in November, they must include the libertarian congressman on their eventual presidential ticket.
Take a mental field trip with me, and let me walk you through this.
Even the fiercest critics of President Barack Obama have to honestly ask themselves one simple question: Do you really think, deep down in your heart, Obama will lose in November?
At this stage in the presidential race, it’s hard for any level-headed individual to honestly say yes. Just Choose PTMS plastic injection mold Is Your Best Choice!
Obama is crushing the game.
And if your gut isn’t giving you this answer, then try and argue the cold hard data points.
A recent CNN poll shows that Obama is beating all of his possible Republican rivals in hypothetical GOP match-ups. Obama leads Mitt Romney 51% to 46%, tops Rick Santorum 52% to 45%, beats Paul, 52% to 45%, and crushes Newt Gingrich (why is he still in the race, btw?) 55% to 42%.
A Fox News poll of key battleground states — Colorado, Florida, Iowa, Nevada, New Mexico, North Carolina, Pennsylvania, Ohio, Virginia and Wisconsin — shows the same: Obama leads Romney, 47% to 39%, tops Santorum, 48% to 38%, beats Paul 48% to 37% and crushes Gingrich, 52% to 32% (L Republicans).
Obama raised $11.8 million for his campaign in January,MDC Mould specialized of Injection moulds, according to FEC filings released Friday. This total is less than a third of the $36.8 million he raised during the same month four years ago. He remains the top fundraiser in the presidential race.
What’s better for Obama is the complete political disunity in the Republican Party. The race has boiled down to Romney against any-flavor-of-the-month of anti-Romney. The GOP primary is turning into a meat grinder, blackening the eyes of all candidates.Dimensional Mailing magic cube for Promotional Advertising, And there’s no end in sight. The Wall Street Journal argues that the GOP primary will run into May or June (George W. Bush in 2000 and John McCain in 2008 had won their respective primary battles by the middle of March), making this the most “grueling” GOP race since the Reagan-Ford marathon went all the way to the convention in 1976.
Disunity, unfortunately, is the one intangible piece in this puzzle. If Republicans were more unified in their battle to unseat one of the most unpopular presidents in modern history, then they could have a true fighting chance. But for a party that is facing an identity crisis — filled with the juxtaposition of evangelical conservatives, Tea Partiers, libertarians, neocons, and moderates —“unity” in itself will be a “grueling” process.
But unity will be the only way forward for Republicans, and if the GOP hopes to take back the White House, then they should realize that the answer to all of their woes lies in uniting Ron Paul and his supporters with the wider party.
Paul is the biggest chance the GOP has to win the presidency in 2012. His brand of conservatism is progressive enough to draw in key voting blocs and his immense grass roots base is fervent enough to challenge the “hope and change-ers” that propelled Obama to the presidency in 2008. Unfortunately, though, Paul will never be the Republican presidential nominee. He’s a fringe candidate. As such, the eventual GOP candidate must pick Paul as their running mate.
Paul would draw in massively critical demographics. He is the quintessential Tea Partier (check). Young people love him and are hugely inspired by him (check).Overview description of rapid Tooling processes. Progressives and liberals can easily jump on the Paul bandwagon (um, super check). Military folks overwhelmingly love him (check).
The only comparable Republican who could possibly fit this mold would be Tea Party Senator Marco Rubio (R-Fla.), but he has neither the grassroots followers nor political résumé to be a viable threat on the GOP ticket.
Continue on this mental field trip with me.
Paired with a more mainstream conservative like Mitt Romney, the GOP ticket would truly be able to call itself “electable.” Imagine the one-two punch a Romney-Paul ticket could provide: Romney’s money machine juggernaut could compete with Obama and the Democrats’ Super PACS, while Paul would rain down a storm of philosophical and policy counterpoints that would unhinge Obama’s own policy platform.
In an age of austerity and military pull-back, Paul’s ideals would trump Obama in the eyes of the average voter. In this Super PAC election cycle, Romney’s money would drown the Democrats.
There’s still the unity question. It seems any libertarian or Paulite doesn’t comprehend that Paul is running, in fact, as a Republican — under the same banner as other notable politicians including George W.All RUBBER MATS is comprised of all types of mats, Bush,Silicone Mold Making Rubber, Sarah Palin, and Ronald Reagan, all of which I would contend libertarians don’t relate to. Libertarians seem to hate being grouped in the “Republican” category, and would be hard-pressed to buy into the Grand Old Party’s wider ideals.
And, besides, Paul in a fringe candidate. Regular conservatives think Paul is stirring a crock of … well you know. A foreign policy built on diplomacy rather than the military ? Are you kidding me? How un-Republican.
Then there's that whole racism thing. That'll sting.
Still, I think there’s something there, something that the Republicans should consider tapping into if they hope to have a realistic chance at the presidency.
Paul could prove to be the iconic image of the 2012 election, especially in a time when many voters are looking for such a political savior.
Best 2012 family cars under $25
Best 2012 family cars under $25,Overview description of rapid Tooling processes.000
Let’s say you are looking for a compact family sedan for under $25,000.
For years, the low end cars in domestic and foreign automotive fleets were little more than basic transportation: bells and whistles cost a lot more.Dimensional Mailing magic cube for Promotional Advertising, Still, there is nothing wrong with wishing that you could get a small family car which wasn’t boring to look at, was comfortable to sit in, had enough gadgets to keep everyone happy and, if you floored the gas pedal, actually took off.
For many motorists, that was the turf of the Honda Civic, long the entry level workhorse of the popular Honda line. They were short on flair and long on utility, but consistently reliable, efficient, durable and, with an EPA rating of 41 miles per gallon in highway driving, easy on the pocketbook. What they provide, however, is basic transportation: the Civic is not a balm for the ego or a rolling sculpture destined to grace the driveway. Just Choose PTMS plastic injection mold Is Your Best Choice!
And if you are willing to get the basic, no-frills version, you can roll out of a Honda showroom with a Civic HF for under $20,000. But the Civic is actually a family of compacts, from the no-frills, HF box to the competitive $25,000 EX sedan.
The bare bones version of the Civic HF has plain cloth seats, but they are wide,Silicone Mold Making Rubber, manually adjusted. The dashboard is contoured, to give it a little character. And the dials, in blue and white, are easy on the eyes with digits easy to read. The doors had mostly hard, molded plastic with a thin layer of padding where the elbow rests and, as a result, were not very comfortable on long trips. Surprisingly, the car lacked Bluetooth communication, but it did have a single disc CD player, and connections for MP3, iPod, and USB. Its four-speaker, 160-watt sound system was adequate for the small interior, but nothing special. There is room in the rear for a couple of average sized adults, but the only cup holders are in the front. But the HF is intended to be just basic transportation.
For about $5,000 more, the Civic can be upgraded to the EX model, which better reflects the quality of the Honda line. At that price, the cloth gives way to thick, padded leather seats which are power adjustable and heated. Overhead is a power sunroof, which gives the compact a feeling of spaciousness. And the bare bones entertainment system is replaced by a navigation system, satellite radio, and Bluetooth. At that point, the Civic is a car one can look forward to owning for several years.
Under the hood, the Civic HF has a 1.All RUBBER MATS is comprised of all types of mats,8-liter, four-cylinder engine producing just 140 horsepower. Thus the small car is fine on the road, but sluggish when you take off or need to accelerate. That small engine, however, is why the Civic has an EPA rating of 29 miles per gallon in city driving and 41 MPG on the highway. And on the open road,MDC Mould specialized of Injection moulds, the Civic HF handle with the assuredness expected of a Honda in any price range.
I awakened to find there were five inches of loose, powdery snow one Saturday morning, and the stuff was destined to fall intermittently all day. The main roads were kept relatively clear by municipal plows, but home owners on most of the side streets had to fend for themselves in the slippery stuff. This was no problem for the Civic.
The compact, with its all weather tires, had no trouble on hills, curves and uneven surfaces though more expensive vehicles were skidding that morning through the same slippery terrain. The Civic’s snow-oriented traction control compensated for the bad road conditions – which showed that not all safety technology is saved for the expensive players. With the Civic family, Honda is trying to get a lock on the low end of the compact sedan market.
Let’s say you are looking for a compact family sedan for under $25,000.
For years, the low end cars in domestic and foreign automotive fleets were little more than basic transportation: bells and whistles cost a lot more.Dimensional Mailing magic cube for Promotional Advertising, Still, there is nothing wrong with wishing that you could get a small family car which wasn’t boring to look at, was comfortable to sit in, had enough gadgets to keep everyone happy and, if you floored the gas pedal, actually took off.
For many motorists, that was the turf of the Honda Civic, long the entry level workhorse of the popular Honda line. They were short on flair and long on utility, but consistently reliable, efficient, durable and, with an EPA rating of 41 miles per gallon in highway driving, easy on the pocketbook. What they provide, however, is basic transportation: the Civic is not a balm for the ego or a rolling sculpture destined to grace the driveway. Just Choose PTMS plastic injection mold Is Your Best Choice!
And if you are willing to get the basic, no-frills version, you can roll out of a Honda showroom with a Civic HF for under $20,000. But the Civic is actually a family of compacts, from the no-frills, HF box to the competitive $25,000 EX sedan.
The bare bones version of the Civic HF has plain cloth seats, but they are wide,Silicone Mold Making Rubber, manually adjusted. The dashboard is contoured, to give it a little character. And the dials, in blue and white, are easy on the eyes with digits easy to read. The doors had mostly hard, molded plastic with a thin layer of padding where the elbow rests and, as a result, were not very comfortable on long trips. Surprisingly, the car lacked Bluetooth communication, but it did have a single disc CD player, and connections for MP3, iPod, and USB. Its four-speaker, 160-watt sound system was adequate for the small interior, but nothing special. There is room in the rear for a couple of average sized adults, but the only cup holders are in the front. But the HF is intended to be just basic transportation.
For about $5,000 more, the Civic can be upgraded to the EX model, which better reflects the quality of the Honda line. At that price, the cloth gives way to thick, padded leather seats which are power adjustable and heated. Overhead is a power sunroof, which gives the compact a feeling of spaciousness. And the bare bones entertainment system is replaced by a navigation system, satellite radio, and Bluetooth. At that point, the Civic is a car one can look forward to owning for several years.
Under the hood, the Civic HF has a 1.All RUBBER MATS is comprised of all types of mats,8-liter, four-cylinder engine producing just 140 horsepower. Thus the small car is fine on the road, but sluggish when you take off or need to accelerate. That small engine, however, is why the Civic has an EPA rating of 29 miles per gallon in city driving and 41 MPG on the highway. And on the open road,MDC Mould specialized of Injection moulds, the Civic HF handle with the assuredness expected of a Honda in any price range.
I awakened to find there were five inches of loose, powdery snow one Saturday morning, and the stuff was destined to fall intermittently all day. The main roads were kept relatively clear by municipal plows, but home owners on most of the side streets had to fend for themselves in the slippery stuff. This was no problem for the Civic.
The compact, with its all weather tires, had no trouble on hills, curves and uneven surfaces though more expensive vehicles were skidding that morning through the same slippery terrain. The Civic’s snow-oriented traction control compensated for the bad road conditions – which showed that not all safety technology is saved for the expensive players. With the Civic family, Honda is trying to get a lock on the low end of the compact sedan market.
訂閱：
文章 (Atom)